XF210 vs XF212
XF210 vs XF212
Is there any reason I can’t use the XF212 plans for 10” speakers and just cut the speaker opening smaller to accommodate the 10” vs 12” speaker?
I don’t have the plans in hand yet, but I can’t see that being a problem unless you say otherwise.
Thanks
I don’t have the plans in hand yet, but I can’t see that being a problem unless you say otherwise.
Thanks
Re: XF210 vs XF212
Out of curiosity, what benefit would that give you?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 8317
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: XF210 vs XF212
I can't think of any problem with that, but it does beg the question.....why? It just makes the cab bigger and heavier.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
- Bill Fitzmaurice
- Site Admin
- Posts: 28645
- Joined: Tue May 02, 2006 5:59 pm
Re: XF210 vs XF212
You may, the penalty being a larger cab than is required.
Re: XF210 vs XF212
Thanks.
Is there a place on the forum or website where I can see the overall dimensions for each before I order the plans?
Is there a place on the forum or website where I can see the overall dimensions for each before I order the plans?
-
- Posts: 8317
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: XF210 vs XF212
The important dimensions for putting a head on top are:
XF210 - 24" wide x 8 1/4" deep
XF212 - 28" wide x 9" deep
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: XF210 vs XF212
Thanks.
They make some good smokers out your way. Had one years ago. Wish I kept it.
They make some good smokers out your way. Had one years ago. Wish I kept it.
-
- Posts: 8317
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: XF210 vs XF212
Ha! Hadn't thought about NB Smoker in years. I knew the guy that owned it. He just died last year. Also had a renter that worked there.
You from the area? If so, you are welcome to come check out my XF210.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: XF210 vs XF212
Ha! Hadn't thought about NB Smoker in years. I knew the guy that owned it. He just died last year. Also had a renter that worked there.
You from the area? If so, you are welcome to come check out my XF210.
Sorry to hear about that. Was that the owner before W.C. Bradley bought it? I have some friends in San Antonio, and lived in Houston some time back. Haven't been that way in quite a while. Now in Ohio.
You from the area? If so, you are welcome to come check out my XF210.
Sorry to hear about that. Was that the owner before W.C. Bradley bought it? I have some friends in San Antonio, and lived in Houston some time back. Haven't been that way in quite a while. Now in Ohio.
-
- Posts: 8317
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: XF210 vs XF212
It was Ron Snider. He had the playground equipment company too. Went on to own a bunch of real estate here and a venue that I mixed in often. Even mixed the memorial they had there for him.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."