Commercially available HF horn compatible with OT12 / ASD1001?

High power and fidelity from an easy to build cabinet.
Message
Author
User avatar
Bryan Cox
Posts: 450
Joined: Sun Nov 22, 2015 3:01 pm
Location: Owensville, Mo

Re: Commercially available HF horn compatible with OT12 / ASD1001?

#16 Post by Bryan Cox »

This one is 15" high and accepts a single driver. Not sure if it'd work, but it'd eliminate the need to stack two.

https://m.aliexpress.com/item/1005002719583332.html
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Commercially available HF horn compatible with OT12 / ASD1001?

#17 Post by Bruce Weldy »

Bryan Cox wrote: Fri Jan 07, 2022 6:52 pm This one is 15" high and accepts a single driver. Not sure if it'd work, but it'd eliminate the need to stack two.

https://m.aliexpress.com/item/1005002719583332.html
At over 7 inches deep, I don't think there's anyway that it would fit with the driver bolted on the back. But, probably worth a look at sketchup to see.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply