there is a mistake in the tuba 60 plans

Get the lowdown on the down low.
Post Reply
Message
Author
holzboss
Posts: 25
Joined: Sat Feb 08, 2020 5:25 am

there is a mistake in the tuba 60 plans

#1 Post by holzboss »

on thr page 4 on the diagram i have two same parameters 9 3/4 is there two times and there should be another number because it is not straight on the image

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28620
Joined: Tue May 02, 2006 5:59 pm

Re: there is a mistake in the tuba 60 plans

#2 Post by Bill Fitzmaurice »

There is no mistake. The measurements were taken directly on the sketchup model. Measure your own sketchup and you'll see.

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: there is a mistake in the tuba 60 plans

#3 Post by Seth »

I assume you're talking about the lower right corner of Layout Diagram 1 on page 4 and Layout Diagram 2 on page 5...

Here's how those two 9¾" dimensions coincide with each other, each is indicated with a red circle
Screenshot (106).png
Screenshot (106).png (59.69 KiB) Viewed 785 times
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Post Reply