Tuba crossed over at 400hz?

Get the lowdown on the down low.
Post Reply
Message
Author
Shenk92
Posts: 5
Joined: Sun Mar 03, 2019 7:22 am

Tuba crossed over at 400hz?

#1 Post by Shenk92 »

I was wondering whether I can crossover a tuba at 400hz instead of 200? The eminence driver should be capable as per their specifications although I don't know what the effect on the cabinet will be. Thanks!

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: Tuba crossed over at 400hz?

#2 Post by Bill Fitzmaurice »

You shouldn't even run a sub to 200Hz, as that's well into the directionally locatable frequencies. I'd take it no higher than 100-120Hz.

Post Reply