Jig Thread

[Bryan Cox]

Does anyone know of a jig thread on here? I've looked and looked but can't find it if there is one.

When HifiBob was building his massive system he used a ton of jigs and mentioned he'd make a thread with the jigs so I've been looking for it.

Thanks!

[J_Dunavin]

I don’t know one off hand, but I did make a sled and inlayed some T slots in there. Used it to clamp down some guides which helped a ton!

[Bryan Cox]

Thanks, J. I'll give that a shot. I'm going to build several jigs to help with the construction of my cabs and I thought it'd be cool if others already had it figured out. I'll post then here when I do.

[Grant Bunter]

Thanks, J. I'll give that a shot. I'm going to build several jigs to help with the construction of my cabs and I thought it'd be cool if others already had it figured out. I'll post then here when I do.

I know Leland and Harley have posted up a couple of pics over time of some jigs.
With my builds, I've made the following.
0 degree zero tolerance cutting sleds, small and large.
Melded piezo array jig.
2 different piezo cutting jigs.
Hand hold jig.
Dual NL4 dish jig.
Spring handle dish jig.


I haven't put up any pics though, they are specific to the tools I'm using, and some are in the plans and jig plans...

[Tom Smit]

I found Hifibob's thread, and it showed a couple of jigs at the start. I didn't look further.
viewtopic.php?f=30&t=19854&hilit=the+journey+begins

I found another thread in the way-back machine. Beware, somebody added and extra "i" with an underline joining the two i's.
viewtopic.php?f=14&t=19028&p=272906&hil ... gs#p272906

[LelandCrooks]

Oh man. I just threw out all my jigs or I'd post some pics. I don't need them anymore since I got my Shaper Cnc router.

[Bryan Cox]

Oh man. I just threw out all my jigs or I'd post some pics. I don't need them anymore since I got my Shaper Cnc router.

No worries. When I start batch building I'm going to throw together jigs that help me. They absolutely will NOT be pretty or professional. But they will work and hopefully be safe.

I'll post them here.