Does anyone know of a jig thread on here? I've looked and looked but can't find it if there is one.
When HifiBob was building his massive system he used a ton of jigs and mentioned he'd make a thread with the jigs so I've been looking for it.
Thanks!
Jig Thread
Jig Thread
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide
Titan 39 x 4 (3012LF) 20" wide
Re: Jig Thread
I don’t know one off hand, but I did make a sled and inlayed some T slots in there. Used it to clamp down some guides which helped a ton!
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
Re: Jig Thread
Thanks, J. I'll give that a shot. I'm going to build several jigs to help with the construction of my cabs and I thought it'd be cool if others already had it figured out. I'll post then here when I do.
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide
Titan 39 x 4 (3012LF) 20" wide
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Jig Thread
I know Leland and Harley have posted up a couple of pics over time of some jigs.Bigcox4002001 wrote: ↑Thu Oct 10, 2019 7:42 pm Thanks, J. I'll give that a shot. I'm going to build several jigs to help with the construction of my cabs and I thought it'd be cool if others already had it figured out. I'll post then here when I do.
With my builds, I've made the following.
0 degree zero tolerance cutting sleds, small and large.
Melded piezo array jig.
2 different piezo cutting jigs.
Hand hold jig.
Dual NL4 dish jig.
Spring handle dish jig.
I haven't put up any pics though, they are specific to the tools I'm using, and some are in the plans and jig plans...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: Jig Thread
I found Hifibob's thread, and it showed a couple of jigs at the start. I didn't look further.
viewtopic.php?f=30&t=19854&hilit=the+journey+begins
I found another thread in the way-back machine. Beware, somebody added and extra "i" with an underline joining the two i's.
viewtopic.php?f=14&t=19028&p=272906&hil ... gs#p272906
viewtopic.php?f=30&t=19854&hilit=the+journey+begins
I found another thread in the way-back machine. Beware, somebody added and extra "i" with an underline joining the two i's.
viewtopic.php?f=14&t=19028&p=272906&hil ... gs#p272906
TomS
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Jig Thread
Oh man. I just threw out all my jigs or I'd post some pics. I don't need them anymore since I got my Shaper Cnc router.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
Re: Jig Thread
No worries. When I start batch building I'm going to throw together jigs that help me. They absolutely will NOT be pretty or professional. But they will work and hopefully be safe.LelandCrooks wrote: ↑Mon Oct 14, 2019 2:26 pm Oh man. I just threw out all my jigs or I'd post some pics. I don't need them anymore since I got my Shaper Cnc router.
I'll post them here.
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide
Titan 39 x 4 (3012LF) 20" wide