I've over cemented my tweeters
I looked through the forums for anything related to "'cement" and how to get rid of excess. I think the closet thing I saw (once you have too much cement, not before cementing) was to use 320 grit sandpaper. True? I tried using a razor blade, which I think could be better because I think sanding could lead to taking off too much and showing discolorations. However, the razor blade method seems to be taking a while...
So sanding?
Dremel?
Thanks
Over cementing
- Bill Fitzmaurice
- Site Admin
- Posts: 28645
- Joined: Tue May 02, 2006 5:59 pm
Re: Over cementing
Wet sand with 320, using a sanding block. To make the look uniform sand the entire array face.
Re: Over cementing
I got a little messy gluing my arrays. Just sanded them smooth and spayed them flat black. Look so good I might not put grills on them (some day).
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102