yet another T48 and OT12 build thread.....

Post your build odyssey here.
Message
Author
sine143
Posts: 3066
Joined: Sat Feb 06, 2010 3:27 pm
Location: Raleigh NC

Re: yet another T48 and OT12 build thread.....

#91 Post by sine143 »

DJPhatman wrote:
sine143 wrote:Sure wish I could stick the last 2 t48 in there somewhere though
That is what the roof rack is there for!!! :loler: :noob: :hyper: :lol: :mrgreen:

done it, didnt like it. almost crapped my pants numerous times in the 3.5 mile drive through the city
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208

2x OT212 (delta pro 450a loaded, eminence psd)

miked
Posts: 1209
Joined: Fri Oct 23, 2009 4:18 am
Location: San Antonio, TX

Re: yet another T48 and OT12 build thread.....

#92 Post by miked »

sine143 wrote:damn you spoiled :lol:

I fit 4 t48s, 4 otops, amp rack, cable bin, and mixer case in this (with NO room to spare).

Image


Sure wish I could stick the last 2 t48 in there somewhere though
Wow. I'm amazed you get 4 T48s in there, let alone all the rest! You must "Tetris-pack" that thing so that only you would know how to unpack it without getting killed.

sine143
Posts: 3066
Joined: Sat Feb 06, 2010 3:27 pm
Location: Raleigh NC

Re: yet another T48 and OT12 build thread.....

#93 Post by sine143 »

2 30" or 2 24" side by side through the back hatch. 2 18" stacked on top of each other through the side door perpindicular to the other 2 t48s. 4 otops on top of 24" or 30" t48s, amp rack and cable bin behind them and close the hatch done. (

(this is why we build different sizes :wink: )
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208

2x OT212 (delta pro 450a loaded, eminence psd)

miked
Posts: 1209
Joined: Fri Oct 23, 2009 4:18 am
Location: San Antonio, TX

Re: yet another T48 and OT12 build thread.....

#94 Post by miked »

I'd be afraid for the glass, with those heavy cabs banging around back there. But, it works for you, obviously. I"m just awed that you fit THAT much stuff in there. I'll have to buy a trailer for my rig. I forsee a few UHaul rentals in the beginning though.

hifibob
Posts: 405
Joined: Sun Jan 20, 2013 5:53 pm
Location: Boston MA

Re: yet another T48 and OT12 build thread.....

#95 Post by hifibob »

Wow thats awesome! Talk about putting them to work asap lol..

David Raehn
Posts: 676
Joined: Tue Apr 30, 2013 5:56 pm
Location: Colonial Beach VA

Re: yet another T48 and OT12 build thread.....

#96 Post by David Raehn »

Thanks hifibob,

It was actually midnight friday night when I made the decision. There had to be bass at this particular venue and my pair of 18" direct radiators was not going to cut it.

For those who think I'm spoiled with my packspace, the trailer holds:
4 t48s
2 18" direct radiators
2 mixing desks
2 cable trunks
1 lighting trunk
2 microphone cases
2 Mackie SRM 450s
4 pole stands
small system (2 10" 2 ways with powered mixer and extra stands)
double width amp rack (48 rack spaces)
LCD projector trunk (holds 4)
800' of 10 and 12 awg power cables
600' of 14 awg power cables
lighting console
6 mic stands
2 music stands
keyboard stand
3 Karastan 6x9 wool carpets
and 8 - 10 milk crates full of small stuff.

In the back of the pickup I carry 4 sections of scaffolding with all the bracing legs and planks.

OK.... I guess I'm kinda spoiled. :D
BFM rig:
6 OT12
4 T48
4 WH8
Other:
56 box Electrotec LabQ rig
Way too many cables
:noob:

miked
Posts: 1209
Joined: Fri Oct 23, 2009 4:18 am
Location: San Antonio, TX

Re: yet another T48 and OT12 build thread.....

#97 Post by miked »

Wow, you've got the full production! Video too? Very nice! I am starting my DJ business from scratch. Though I have a 16-channel analog mixer, I don't have a cable snake, nor a drum mic set, etc. So "live sound" is out for now. Once the T48s are finished, I just need to spend a few hundred bucks on some cheap lights and I'm ready to go. Can't be a mobile DJ with no lights. :oops:

David Raehn
Posts: 676
Joined: Tue Apr 30, 2013 5:56 pm
Location: Colonial Beach VA

Re: yet another T48 and OT12 build thread.....

#98 Post by David Raehn »

Not to be accused of resting on my laurels, after 2 gigs under a sheet I decided to go ahead and get some black base coat on these monsters. I also built one of my proposed fleet of four well-overbuilt caster pallets. The only thing missing from the pallet are the end boards that will stick up ~1" from the deck. The little steel pieces are for ratchet straps to hook into. I happened into 16 of those wonderful casters and intend to make good use of them.
Attachments
T48progress22.JPG
BFM rig:
6 OT12
4 T48
4 WH8
Other:
56 box Electrotec LabQ rig
Way too many cables
:noob:

miked
Posts: 1209
Joined: Fri Oct 23, 2009 4:18 am
Location: San Antonio, TX

Re: yet another T48 and OT12 build thread.....

#99 Post by miked »

Now those are monster dollies! Those wheels are pretty pricey. It's great that you're putting them to good use.

David Raehn
Posts: 676
Joined: Tue Apr 30, 2013 5:56 pm
Location: Colonial Beach VA

Re: yet another T48 and OT12 build thread.....

#100 Post by David Raehn »

My son's band was invited to play at a local tourist farm on Saturday. No advertising. No pay. No pressure. Just a (windy) day of fun. Reminded me of 'Live at Pompeii'... T48s were happy.
Attachments
DSC04107a.JPG
DSC03938a.JPG
BFM rig:
6 OT12
4 T48
4 WH8
Other:
56 box Electrotec LabQ rig
Way too many cables
:noob:

miked
Posts: 1209
Joined: Fri Oct 23, 2009 4:18 am
Location: San Antonio, TX

Re: yet another T48 and OT12 build thread.....

#101 Post by miked »

Very nice. It almost looks like the olive fields in Pompeii (I've been there). I like the roadcases with everything built into them. Snap on the front and back and away you go.

User avatar
escapemcp
Posts: 1219
Joined: Thu Feb 07, 2013 8:57 pm
Location: Bristol, UK

Re: yet another T48 and OT12 build thread.....

#102 Post by escapemcp »

draehn wrote: 4 t48s
2 18" direct radiators
2 mixing desks
2 cable trunks
1 lighting trunk
2 microphone cases
2 Mackie SRM 450s
4 pole stands
small system (2 10" 2 ways with powered mixer and extra stands)
double width amp rack (48 rack spaces)
LCD projector trunk (holds 4)
800' of 10 and 12 awg power cables
600' of 14 awg power cables
lighting console
6 mic stands
2 music stands
keyboard stand
3 Karastan 6x9 wool carpets
and 8 - 10 milk crates full of small stuff.

In the back of the pickup I carry 4 sections of scaffolding with all the bracing legs and planks.
Jealous :mrgreen: :mrgreen:

David Raehn
Posts: 676
Joined: Tue Apr 30, 2013 5:56 pm
Location: Colonial Beach VA

Re: yet another T48 and OT12 build thread.....

#103 Post by David Raehn »

Jealous?

That's me in the hat at the mixing desk waiting for the Aleve to kick in!
BFM rig:
6 OT12
4 T48
4 WH8
Other:
56 box Electrotec LabQ rig
Way too many cables
:noob:

User avatar
escapemcp
Posts: 1219
Joined: Thu Feb 07, 2013 8:57 pm
Location: Bristol, UK

Re: yet another T48 and OT12 build thread.....

#104 Post by escapemcp »

Looking at that pic, I don't think you have been following the recommended audience size figures... for your 4 T48s that should be 250-800 people! You're just being greedy!! :lol:

User avatar
DJPhatman
Posts: 5411
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: yet another T48 and OT12 build thread.....

#105 Post by DJPhatman »

escapemcp wrote:Looking at that pic, I don't think you have been following the recommended audience size figures... for your 4 T48s that should be 250-800 people! You're just being greedy!! :lol:
CONCERT FOR THREE!!!!!!!!!!

'Effin AWESOME!
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

Post Reply