Plytanium?

Helpful hints on how to build 'em, and where to get the stuff you need.
Message
Author
User avatar
Bas Gooiker
Posts: 752
Joined: Fri Jul 06, 2012 5:05 pm

Re: Plytanium?

#16 Post by Bas Gooiker »

darklango wrote:Hey Don,

What town is that cabinet shop in? I'm about 3 hrs from Savannah. please say west of savannah
Prices might have gone up a little over the last 3 years...
Life is just a game, don't take it to seriously!

darklango
Posts: 11
Joined: Sat Apr 13, 2013 8:45 pm

Re: Plytanium?

#17 Post by darklango »

Bas Gooiker wrote:
darklango wrote:Hey Don,

What town is that cabinet shop in? I'm about 3 hrs from Savannah. please say west of savannah
Prices might have gone up a little over the last 3 years...

arghh, I didnt even look at the date of the post

User avatar
doncolga
Posts: 1967
Joined: Thu Jul 01, 2010 3:01 pm
Location: Statesboro, GA
Contact:

Re: Plytanium?

#18 Post by doncolga »

Hey,

This is it. I picked mine up in Pooler, just off I-95.

http://www.heritageforestproducts.com/

Donny
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW

67baja
Posts: 931
Joined: Sat Dec 11, 2010 12:10 am
Location: Las Vegas, NV

Re: Plytanium?

#19 Post by 67baja »

For the record, BB is right at $25 per sheet in Vegas right now.
2 THTs, 2 TLAH, SLA curved, 1 8-AT, 1 AT JBL 1002D, 4 Otop12s, Jack 12, TT with Eminence 10", 2 SLAs, 1 T30 slim, 2 T30s (2-10" each), SLA Pros, TrT.

biggerrigger
Posts: 560
Joined: Sun Jan 28, 2007 6:32 am
Location: ohio

Re: Plytanium?

#20 Post by biggerrigger »

$36 in Southern Ohio
Built
4-25" Lab12 loaded T39's
2-DR250's Melded array
2-DR250's Flat array

88h88
Posts: 1606
Joined: Mon Jul 04, 2011 10:20 am
Location: Coventry, UK

Re: Plytanium?

#21 Post by 88h88 »

$60 here. :x
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"

User avatar
Bas Gooiker
Posts: 752
Joined: Fri Jul 06, 2012 5:05 pm

Re: Plytanium?

#22 Post by Bas Gooiker »

88h88 wrote:$60 here. :x
About the same over here... :cussing:

Funny though we are both quitte a bit closer to the Baltic area as Vegas last time i checked.
Life is just a game, don't take it to seriously!

Bruce Weldy
Posts: 8585
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Plytanium?

#23 Post by Bruce Weldy »

Bas Gooiker wrote:
88h88 wrote:$60 here. :x
About the same over here... :cussing:

Funny though we are both quitte a bit closer to the Baltic area as Vegas last time i checked.

Got a feeling that import taxes are accounting for the wide discrepancy.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply