2 x Jack 112 Lite

Post your build odyssey here.
Post Reply
Message
Author
User avatar
Charles Jenkinson
Posts: 1125
Joined: Sat Aug 06, 2011 3:25 pm
Location: Manchester, UK

2 x Jack 112 Lite

#1 Post by Charles Jenkinson »

Just making a start. Thought I'd share my cutlist layouts - I did it in Autocad.
2xJ12L (3012HO) switchable/melded
2xT30

Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.

Chris_Admin
Posts: 22
Joined: Sun Jun 22, 2008 7:41 am

Re: 2 x Jack 112 Lite

#2 Post by Chris_Admin »

Sorry Charles, I've had to edit your post - I thought it was a little too close to publishing the dimensions of the component parts.

I realise you weren't explicit on the majority of the components but they were all there in one place.

I've left the thread here in case anyone would like to PM you for them.

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28620
Joined: Tue May 02, 2006 5:59 pm

Re: 2 x Jack 112 Lite

#3 Post by Bill Fitzmaurice »

Chris_Admin wrote: I've left the thread here in case anyone would like to PM you for them.
And if they do for your own protection make sure they have their own plans.

User avatar
Harley
Posts: 5763
Joined: Mon May 08, 2006 2:45 pm
Location: Christchurch, New Zealand - Authorised BFM Cab Builder

Re: 2 x Jack 112 Lite

#4 Post by Harley »

So why leave the thread here then? It serves no purpose now.
ImageSemi-retired: Former Australia and New Zealand Authorised BFM cab builder.

User avatar
Charles Jenkinson
Posts: 1125
Joined: Sat Aug 06, 2011 3:25 pm
Location: Manchester, UK

Re: 2 x Jack 112 Lite

#5 Post by Charles Jenkinson »

Harley wrote:So why leave the thread here then? It serves no purpose now.
Hang on! Let's not be too hasty.

Now that I've got the attention of the 3 most important people on the forum, wouldn't it be fun just to see where we end up? I mean, its a hell of a start for my build thread.
2xJ12L (3012HO) switchable/melded
2xT30

Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.

Gregory East
Posts: 3496
Joined: Sat May 13, 2006 9:56 pm

Re: 2 x Jack 112 Lite

#6 Post by Gregory East »

Build pics are great, everyone loves a good build thread. Sometimes someone will notice a little cockup, unlikely with you redoing them in autocad, but you never know.
BAT10, Bad Auto Tuba. Reverse folded TAT to fit JBL 1014D, 350W driver, voltage limit unknown.

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: 2 x Jack 112 Lite

#7 Post by Grant Bunter »

Cracking start Charles :)
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Gregory East
Posts: 3496
Joined: Sat May 13, 2006 9:56 pm

Re: 2 x Jack 112 Lite

#8 Post by Gregory East »

Never mind the cheeky Aussie.

Edit: Start a new thread if you like.
BAT10, Bad Auto Tuba. Reverse folded TAT to fit JBL 1014D, 350W driver, voltage limit unknown.

User avatar
Charles Jenkinson
Posts: 1125
Joined: Sat Aug 06, 2011 3:25 pm
Location: Manchester, UK

Re: 2 x Jack 112 Lite

#9 Post by Charles Jenkinson »

I think Grant got the irony pretty well. I'm happy to stick with it. If it grates on the majority (a poll perhaps?) it could be killed. While we're on it, I've found the Antipodeans to be the most enthusiastic people I've ever met. Grants crossover terminals should '+ve' and 'even more +ve'.
2xJ12L (3012HO) switchable/melded
2xT30

Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: 2 x Jack 112 Lite

#10 Post by Grant Bunter »

Charles Jenkinson wrote:I think Grant got the irony pretty well. I'm happy to stick with it. If it grates on the majority (a poll perhaps?) it could be killed. While we're on it, I've found the Antipodeans to be the most enthusiastic people I've ever met. Grants crossover terminals should '+ve' and 'even more +ve'.
Glad my comment was taken with the jest that was intended!

Thanks also for the compliment.

Looking forward to seeing the rest of the build unfold here...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
Harley
Posts: 5763
Joined: Mon May 08, 2006 2:45 pm
Location: Christchurch, New Zealand - Authorised BFM Cab Builder

Re: 2 x Jack 112 Lite

#11 Post by Harley »

Charles Jenkinson wrote:(a poll perhaps?) I could be killed..
Image

:mrgreen: :loler:
ImageSemi-retired: Former Australia and New Zealand Authorised BFM cab builder.

User avatar
Chris_Allen
Posts: 3355
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: 2 x Jack 112 Lite

#12 Post by Chris_Allen »

but......is he heavier than a duck?
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

User avatar
Scott Brochu
Posts: 2457
Joined: Sat Mar 10, 2007 11:53 pm
Location: Maine Authorized BF Builder
Contact:

Re: 2 x Jack 112 Lite

#13 Post by Scott Brochu »

OMG! What have become us?? :lol: :fruit:
Drumming is a way of life.
ME LIKE TO HIT THINGS!
http://billfitzmaurice.info/forum/viewt ... 26&t=11232

Gregory East
Posts: 3496
Joined: Sat May 13, 2006 9:56 pm

Re: 2 x Jack 112 Lite

#14 Post by Gregory East »

It's not going to stop until there are pictures. Even then it won't stop.
BAT10, Bad Auto Tuba. Reverse folded TAT to fit JBL 1014D, 350W driver, voltage limit unknown.

User avatar
LelandCrooks
Posts: 7244
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: 2 x Jack 112 Lite

#15 Post by LelandCrooks »

:loler: :loler: :loler: :loler:

Dammit Harley, now I'm going to have to watch that again. Been a couple of years.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

Post Reply