How do you test your AMP's output with a Volt Meter ???

Anything not covered elsewhere.
Post Reply
Message
Author
Gregory East
Posts: 3495
Joined: Sat May 13, 2006 9:56 pm

Re: How do you test your AMP's output with a Volt Meter ???

#31 Post by Gregory East »

You're welcome, subs are specified, tops aren't anywhere near as critical, use the driver rms as your guide.
BAT10, Bad Auto Tuba. Reverse folded TAT to fit JBL 1014D, 350W driver, voltage limit unknown.
Top
metaverse
Posts: 174
Joined: Tue Nov 23, 2010 8:00 pm

Re: How do you test your AMP's output with a Volt Meter ???

#32 Post by metaverse »

ok ill check the plans ... thanks Greg.
PRODUCT IDEA : Speaker Placements for Rooms of Various Shapes & Sizes : A Video Series / YouTube Channel
Top
metaverse
Posts: 174
Joined: Tue Nov 23, 2010 8:00 pm

Re: How do you test your AMP's output with a Volt Meter ???

#33 Post by metaverse »

Really sorry to be an ass but i'm posting this from my studio right now (12:16am) and the external hard drive with my plans CD is at the house which is 20min. away ...

Does anyone know the voltage limit for an eminence lab12" subwoofer because i've searched parts express twice and can't find it ...
PRODUCT IDEA : Speaker Placements for Rooms of Various Shapes & Sizes : A Video Series / YouTube Channel
Top
Grant Bunter
Posts: 6912
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:
Contact Grant Bunter

Re: How do you test your AMP's output with a Volt Meter ???

#34 Post by Grant Bunter »

Which cab?
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Top
Post Reply

Return to “Everything Else”