Introducing SPL Chart

Anything not covered elsewhere.
Post Reply
Message
Author
User avatar
Chris_Allen
Posts: 3355
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Introducing SPL Chart

#61 Post by Chris_Allen »

DJPhatman wrote:Missing the t24 charts. S2010 and BP102 please.
No problem:

Code: Select all

[spl]T24W16D2010,T24W24D2010,T24W16DBP102,T24W24DBP102& dbmin=75&dbmax=105&fmax=200[/spl]
Last edited by Chris_Allen on Sun Jan 07, 2018 10:01 am, edited 1 time in total.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

5StringPocket
Posts: 30
Joined: Sun Nov 22, 2009 4:56 pm

Re: Introducing SPL Chart

#62 Post by 5StringPocket »

The O15TB with 3015LF driver seems to be an ideal heavy hitting single cab rig for bass. I'd like to know how a pair of J112's loaded with 3012HO and either the melded piezos or NSD2005 would compare to it. Any chance of getting J112 charts with these 3012HO options? For a bass rig, assume the J112's were equipped with HF on/off switch and stacked with HF "On" for the top cab and "Off" for the bottom cab. The 3012HO's are good down to 50 Hz, displace 330 cm3 and limited at about 300 watts each. This would be 660 cm3, 600 watts at 4 ohms for the 3012HO pair versus 846 cm3, 450 watts at 8 ohms for the 3015LF.

It looks like if your amp was capable of 450 watts into 8 ohms the O15TB would still move more air but a 70lb cab is harder to move single handed up and down stairs. 100.5 dB at 50 Hz is very solid bass for the pair of 3012HO-loaded J112's and the mid hump between 250-700 Hz would give them a lot of punch and presence. The Omni looks to have more ultimate low end and a bit more even response while the Jacks would a little easier to move and very efficient. Tough choice. Either one would be a monster. Any other thoughts on this?

Code: |spl dbmin=80&dbmax=120&dbmark=94.5,100.5&fmark=50|J112D3012,J110NSD2005,O15D3015|/spl|

User avatar
Chris_Allen
Posts: 3355
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Introducing SPL Chart

#63 Post by Chris_Allen »

I've updated the thread to include all the file names in the first post.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

SeisTres
Posts: 2689
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Re: Introducing SPL Chart

#64 Post by SeisTres »

YAY!!! this just got like a hundred times easier!

Now I can stop trying to build a list of my own :P
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Introducing SPL Chart

#65 Post by DJPhatman »

Chris, will you please do a 10Hz to 200 Hz of the THT. Thanks.
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

User avatar
anomalous
Posts: 171
Joined: Tue May 16, 2006 6:40 pm
Location: Sydney, Australia

Re: Introducing SPL Chart

#66 Post by anomalous »

David Carter wrote:Chris, do you have data for T39 20" with the 3012LF?
can i second this request? a chart with a 20" T39 with all the common drivers would be cool.

User avatar
Chris_Allen
Posts: 3355
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Introducing SPL Chart

#67 Post by Chris_Allen »

I've got both the 20" 3012 T39 chart and the THT's, so I'll get them sampled.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

User avatar
David Carter
Posts: 1826
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Re: Introducing SPL Chart

#68 Post by David Carter »

Chris_Allen wrote:I've got both the 20" 3012 T39 chart and the THT's, so I'll get them sampled.
:clap: :hyper: :noob:
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

User avatar
Chris_Allen
Posts: 3355
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Introducing SPL Chart

#69 Post by Chris_Allen »

Code: Select all

[spl]T39W20D3012&dbmin=80&fmax=200[/spl]


Code: Select all

[spl]THTW15DLab12,THTW30DLab12,THTW18DTempest,THTW30DTempest&dbmin=95&dbmax=115&fmax=200[/spl]
Last edited by Chris_Allen on Sun Jan 07, 2018 10:03 am, edited 1 time in total.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

User avatar
anomalous
Posts: 171
Joined: Tue May 16, 2006 6:40 pm
Location: Sydney, Australia

T39 comparison

#70 Post by anomalous »



makes an interesting comparison. with the 3012LF, going from 20" wide to 30" wide makes a massive difference.

the 3012LF is clearly the killer driver, with a 20" 3012LF going pretty close to keeping up with a 30" wide 2012 powered T39.

but what i'd like to know is: what the hell was the mystery 10" driver (blue trace) that looks to be very close to the 3012LF?! or is that a mistake...

a thought for a useful extension to the [spl] code - wildcards in the filenames.

so if i wanted to see all widths of a T39 with a 3012LF, the code might look like:

spl dbmin=80&dbmax=115&fmax=200]T39W?D3012

or all cabs using a 2010:

spl dbmin=80&dbmax=115&fmax=200]?W?D2010

Turntablist
Posts: 905
Joined: Thu May 18, 2006 5:02 am
Location: Sweden

Re: T39 comparison

#71 Post by Turntablist »

anomalous wrote: but what i'd like to know is: what the hell was the mystery 10" driver (blue trace) that looks to be very close to the 3012LF?! or is that a mistake...
It's the S2010. It's very close in sensitivity in a 20" wide cab but a S2010 can only handle 1/4 the power of the 3012LF so the 3012LF will beat it by 6db.
-2 T48 3015LF
-2 DR250 2510 crossfired

User avatar
Chris_Allen
Posts: 3355
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Introducing SPL Chart

#72 Post by Chris_Allen »

From the chart I wasn't sure if it was a BP102 or a S2010, so I left it as just 10. Otherwise, I agree completely with turntablist post.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

User avatar
jcmbowman
Posts: 1263
Joined: Fri Feb 01, 2008 3:40 pm
Location: Detroit, MI

Re: Introducing SPL Chart

#73 Post by jcmbowman »

So, I did a quick comparison of the T36 and the THT:



And it appears that you're using THT measurements that are corner loaded. Look at the charts in this thread:
http://billfitzmaurice.info/forum/viewt ... f=12&t=953

Here's the chart in question.
The Tuba HT, freestanding, wall and corner placement, 24.5 inches wide, loaded with a Tempest Classic 15.
Image
Is there any chance you could revise the chart to reflect 1/2 space measurements, rather than 1/8 space measurements? It would make it a lot easier to do apples-to-apples measurements....

( I was a little shocked to see that I really should have built the THT instead of my beloved T36s. :? )
Low End Junkie for over 20 years.

4 DR250s
4 Tuba36s @ 30" wide
2 ATs
...and a very serious addiction to the smell of BB sawdust and curing PL.

User avatar
Chris_Allen
Posts: 3355
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Introducing SPL Chart

#74 Post by Chris_Allen »

I got the THT chart from the docs, but I can include the others as well.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

User avatar
BrentEvans
Posts: 3044
Joined: Thu Oct 09, 2008 10:38 am
Location: Salisbury, NC

Re: Introducing SPL Chart

#75 Post by BrentEvans »

Hey Chris,

What would you think about a function that moves the chart up or down a specified number of db? This would be interesting for comparisons, and give a rough measure for cab multiples, to be used in system matching.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.

Post Reply