3010HO?
-
- Posts: 2627
- Joined: Sun Jan 28, 2007 11:13 am
- Location: Denver, CO
- Contact:
3010HO?
Bill, do you know if Eminence has plans to do a 3010HO type driver that may be suitable in a DR250? I like the size of the DR250 over a 280, but if I'm going to spend the time eventually building a few, it seems like the 280 with the 3012HO would be the route to go for maximum output in the smaller number of cabs.
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: 3010HO?
My understanding is that engineering would like to do 3010 style drivers, sales doesn't think the market is there for them. Obviously we take engineering's side. Only time will tell.
Re: 3010HO?
Well, at least there's a possibility; keeping fingers crossed. This would totally shift the whole thing about DR 250vs200. And of course would make the decision making for me much easier
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: 3010HO?
It shouldn't, a 3010 versus 2510 might make a 3dB difference. What I'd like to see more than a 3010HO is a 3010LF for sub use.SeisTres wrote: And of course would make the decision making for me much easier
Re: 3010HO?
True, true, but im not particularly fond ( ) of building cabs, and much less the dr series, so I would try to get absolutely the most out I could from the fewest dr's.Bill Fitzmaurice wrote:It shouldn't, a 3010 versus 2510 might make a 3dB difference.
WHA!? I hadn't thought of that I can imagine upgrading all my six 16" t39'sBill Fitzmaurice wrote: What I'd like to see more than a 3010HO is a 3010LF for sub use.
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub
-
- Posts: 905
- Joined: Thu May 18, 2006 5:02 am
- Location: Sweden
Re: 3010HO?
You're right, and the build will get more expensive, and any melded array might not keep up so the build might get even more expensive.. But still.. Two cabs would have almost the same output as three with the 2510II.. The cash spent on more expensive drivers will be made up for by less drivers and a cab less. And I know people would find that attractive!Bill Fitzmaurice wrote:It shouldn't, a 3010 versus 2510 might make a 3dB difference.
-2 T48 3015LF
-2 DR250 2510 crossfired
-2 DR250 2510 crossfired
Re: 3010HO?
Bring it onBill Fitzmaurice wrote:What I'd like to see more than a 3010HO is a 3010LF for sub use.
2510 weight + HL10 output = super lightweight killer subs
-
- Posts: 398
- Joined: Fri Aug 08, 2008 2:44 pm
- Location: Levittown Puerto Rico
Re: 3010HO?
Maybe if we all send Eminence a PM once a day for the 3010's HO & LF they might listen.
Christopher Betancourt
Authorized Builder
Puerto Rico
Built:
4xTitan 39-3012LF, 2xWedgehorn 8, 4xOT12, 8xOT12J on the works.
All running w/SAC or DL1606
On the table:
too much work!! LOL
Future:
It's a secret for now. Shhhh....
Authorized Builder
Puerto Rico
Built:
4xTitan 39-3012LF, 2xWedgehorn 8, 4xOT12, 8xOT12J on the works.
All running w/SAC or DL1606
On the table:
too much work!! LOL
Future:
It's a secret for now. Shhhh....