I got a couple of these for free. Could they be used in any of Bill's designs?
Carvin PS12-8
http://www.carvinguitars.com/manuals/tsp.html
Fs (Hz) 46.81
Qms 4.95
Vas (L) 140.09
Cms (mm/N) 0.3519
Mms(g) 32.8
Rms (kg/s) 1.9525
Xmax (mm) 0.9
Dia (in) 2
Sd (sq.cm) 532.36
Qes 0.47
Re(ohms) 7.03
Le(mH) 0.85
Z(ohms) 8
BI (Tm) 12.04
Pe (W) 300
Qts 0.43
no % 2.95
SPL 1w/1m (dB) 96.7
Thanks JH
Carvin PS12
Carvin PS12
Built:
2 Jack 10, DLII 2510
1 T39, 20" S2012
2 x Autotuba, MCM
2 Jack 10, DLII 2510
1 T39, 20" S2012
2 x Autotuba, MCM
Re: Carvin PS12
XF Guitar Cab?John H wrote: Xmax (mm) 0.9
Tomorrow I'm going to stop procrastinating - WB
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: Carvin PS12
That would be the only one, it's a guitar driver.WB wrote:XF Guitar Cab?John H wrote: Xmax (mm) 0.9