Introducing SPL Chart

Anything not covered elsewhere.
Message
Author
User avatar
escapemcp
Posts: 1220
Joined: Thu Feb 07, 2013 8:57 pm
Location: Bristol, UK

Re: Introducing SPL Chart

#286 Post by escapemcp » Fri Jan 16, 2015 10:59 pm

chrisj360 wrote:If I was to try to approximate the output of multiple T30's (I have the Lab12 loaded and I think the 3012LF is the closest match), I would just add +3 for each cab added like so?



Is this correct or did I miss something?
It's +6dB for every doubling of cab count (assuming they are properly powered like the first). 1 cab=as chart, 2=+6dB, 4=+12dB, 8=+18dB, 16=24dB (etc)

Rich4349
Posts: 613
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: Introducing SPL Chart

#287 Post by Rich4349 » Sat Jan 17, 2015 10:19 pm

Could we get the T-45 with 3012l, in 15 and 24" versions, please? (Plus 18 or 20 would be a pleasant bonus, too :) )
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

CoronaOperator
Posts: 1375
Joined: Wed Mar 25, 2009 7:07 pm
Location: Medicine Hat, Alberta, Canada

Re: Introducing SPL Chart

#288 Post by CoronaOperator » Mon Mar 16, 2015 5:13 am

[spl width =650&height=450&fmin=20&fmax=120&dbmin=85&dbmax=125]T60W15DLab12+12,T45W24DLab12+12,T60W30DLab12X2+6,JBLSRX728+8.1[/spl]
Last edited by CoronaOperator on Mon Mar 16, 2015 10:24 pm, edited 1 time in total.
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience

User avatar
Drey Chennells
Posts: 1375
Joined: Sun May 17, 2009 10:12 pm
Location: Central FL ~Authorized Builder
Contact:

Re: Introducing SPL Chart

#289 Post by Drey Chennells » Mon Mar 16, 2015 10:14 pm

nice chart thank you
"Things happen, but music stays in your blood forever~." bf

InfraCoustik
Consulting/Design/Fabrication
Authorized BF Builder
http://www.infracoustik.com/
info@infracoustik.com

CoronaOperator
Posts: 1375
Joined: Wed Mar 25, 2009 7:07 pm
Location: Medicine Hat, Alberta, Canada

Re: Introducing SPL Chart

#290 Post by CoronaOperator » Mon Mar 16, 2015 10:22 pm

Drey Chennells wrote:nice chart thank you
I'm trying to see if 4 Tubas @ 50 volts are a suitable replacement/improvement over 2 SRX728's @ ~70-80 volts hence the +12 dB's and +8 dB's added to the charts. Looks like a build thread coming soon. :chainsaw:
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience

User avatar
Drey Chennells
Posts: 1375
Joined: Sun May 17, 2009 10:12 pm
Location: Central FL ~Authorized Builder
Contact:

Re: Introducing SPL Chart

#291 Post by Drey Chennells » Mon Mar 16, 2015 11:40 pm

hell yea good choice
"Things happen, but music stays in your blood forever~." bf

InfraCoustik
Consulting/Design/Fabrication
Authorized BF Builder
http://www.infracoustik.com/
info@infracoustik.com

Rich4349
Posts: 613
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: Introducing SPL Chart

#292 Post by Rich4349 » Wed Mar 18, 2015 9:15 am

Bill Fitzmaurice wrote:Do you propose that I build and measure a cab in every conceivable size loaded with every conceivable driver? That most assuredly is not going to happen.
No, I thought you had modelling software that eliminated the need to build every idea that comes out of your drafting table.
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

88h88
Posts: 1561
Joined: Mon Jul 04, 2011 10:20 am
Location: Coventry, UK

Re: Introducing SPL Chart

#293 Post by 88h88 » Mon Mar 23, 2015 3:28 am

Rich4349 wrote:No, I thought you had modelling software that eliminated the need to build every idea that comes out of your drafting table.
Where's the fun in that?! :lol:
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"

Luke the Fluke
Posts: 24
Joined: Sat Jan 25, 2014 11:34 am

Re: Introducing SPL Chart

#294 Post by Luke the Fluke » Fri Jul 03, 2015 5:21 pm



sorry justl ooking at something

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Introducing SPL Chart

#295 Post by DJPhatman » Thu Aug 20, 2015 12:50 pm

Chris_Allen, will the Simplexx line-up be added anytime soon?
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

User avatar
Chris_Allen
Posts: 3207
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Introducing SPL Chart

#296 Post by Chris_Allen » Thu Aug 20, 2015 1:12 pm

I lost the up to date source code for the application I wrote to do the sampling. So I'm trying to find the time to update an old copy.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Introducing SPL Chart

#297 Post by DJPhatman » Sun Jan 22, 2017 8:45 pm

DJPhatman wrote:Chris_Allen, will the Simplexx line-up be added anytime soon?
Chris_Allen wrote:I lost the up to date source code for the application I wrote to do the sampling. So I'm trying to find the time to update an old copy.
Still waiting....
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Introducing SPL Chart

#298 Post by DJPhatman » Wed May 10, 2017 12:41 pm

DJPhatman wrote:Chris_Allen, will the Simplexx line-up be added anytime soon?
1 1/2 years later, and still waiting... :oops: :cry:
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

User avatar
Chris_Allen
Posts: 3207
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: Introducing SPL Chart

#299 Post by Chris_Allen » Sat May 13, 2017 2:12 am

DJPhatman wrote:
DJPhatman wrote:Chris_Allen, will the Simplexx line-up be added anytime soon?
1 1/2 years later, and still waiting... :oops: :cry:
Point taken.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Introducing SPL Chart

#300 Post by DJPhatman » Sat May 13, 2017 12:47 pm

Chris_Allen wrote:
DJPhatman wrote:
DJPhatman wrote:Chris_Allen, will the Simplexx line-up be added anytime soon?
1 1/2 years later, and still waiting... :oops: :cry:
Point taken.
Sorry, mate! But, sometimes the stick just makes you.

CHECK, PLEASE!!!! An ode to someone elses "Get my coat!"
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

Post Reply