Introducing SPL Chart
- BrentEvans
- Posts: 3044
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Re: Introducing SPL Chart
Fair enough. Here's an idea though; would it be feasible to make an "Insert Chart" link on the post page which pops up a GUI with selection boxes for the various parameters and then inserts the proper code into the post? It would ease usability and give an all-in-one reference point for which cabs are in the system.
Great job on the program though, what a fantastic iidea for an audio board!
Great job on the program though, what a fantastic iidea for an audio board!
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: Introducing SPL Chart
I can insert the SPL tags in the posting page, but as for the a GUI that does it all for you, that would be a lot of work.BrentEvans wrote:Fair enough. Here's an idea though; would it be feasible to make an "Insert Chart" link on the post page which pops up a GUI with selection boxes for the various parameters and then inserts the proper code into the post? It would ease usability and give an all-in-one reference point for which cabs are in the system.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- BrentEvans
- Posts: 3044
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Re: Introducing SPL Chart
No problem, of course. Inserting the SPL tags would be great. Even just a quick-reference link would work pretty well too, and maybe not so much coding as a form.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
-
- Posts: 674
- Joined: Thu Jun 21, 2007 7:20 pm
- Location: Mount Airy, MD
- Contact:
Re: Introducing SPL Chart
Hey Chris can you stick this so it doesn't get culled.
Builds:
T-39
DR 280
Wedgehorn 8
Omni 12
SLA
TAT
TLAH experimental
T-39
DR 280
Wedgehorn 8
Omni 12
SLA
TAT
TLAH experimental
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: Introducing SPL Chart
...no problem...
I'm going to add some more cabs today including the piezo array.
I'm going to add some more cabs today including the piezo array.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: Introducing SPL Chart
I've added three wedges: the W10, W8 and JBL 915M.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- BrentEvans
- Posts: 3044
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Re: Introducing SPL Chart
Chris,
Could you add in the Soundbridge 4112? The plot is at http://www.soundbridge.com/pdfs/4000pdf/4112ht.pdf.
Thanks
Could you add in the Soundbridge 4112? The plot is at http://www.soundbridge.com/pdfs/4000pdf/4112ht.pdf.
Thanks
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: Introducing SPL Chart
Here you go:
Code: Select all
[spl]sb4112ht,DR250&dbmin=60&dbmax=110[/spl]
Last edited by Chris_Allen on Sun Jan 07, 2018 9:50 am, edited 1 time in total.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- BrentEvans
- Posts: 3044
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Re: Introducing SPL Chart
Thanks! So there is no Hijack, i'll move my further question to another thread.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
Re: Introducing SPL Chart
Hey Chris,
any chance of some T39's? i know there is at least one (T39W14D2010) but what else is available? different widths with a given driver, in a range of drivers, would be supremely useful to all of us trying to figure what to build
if you are looking for new features - maybe add a parameter for multiple cabs. X2T39, X4T39... etc...
I'd have never found this thread if you hadn't drawn my attention to it - maybe it should go in the SPL Charts forum, which is where people wanting this info go to look for it first.
cheers, and awesome work! - I hope you dont get overwhelmed by requests for responses and mods
ben
any chance of some T39's? i know there is at least one (T39W14D2010) but what else is available? different widths with a given driver, in a range of drivers, would be supremely useful to all of us trying to figure what to build
if you are looking for new features - maybe add a parameter for multiple cabs. X2T39, X4T39... etc...
I'd have never found this thread if you hadn't drawn my attention to it - maybe it should go in the SPL Charts forum, which is where people wanting this info go to look for it first.
cheers, and awesome work! - I hope you dont get overwhelmed by requests for responses and mods
ben
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: Introducing SPL Chart
Unfortunately, I have been informed by Bill that calculating multiple cabs together is not as straight forward as it appears. I still have a few charts to sample, especially ones with multiple cabs. I might look into the mutliple options to see how it turns out.anomalous wrote:if you are looking for new features - maybe add a parameter for multiple cabs. X2T39, X4T39... etc...
Once the list of charts is more comprehensive and the ability to list the cabs from the tool is available, I probably will.maybe it should go in the SPL Charts forum, which is where people wanting this info go to look for it first.
T39? this is what is available:
Code: Select all
[spl]T39W30D12,T39W20D10,T39W18D2010,T39W14D2010&dbmin=80&dbmax=115&fmin=20&fmax=200[/spl]
Last edited by Chris_Allen on Sun Jan 07, 2018 9:51 am, edited 1 time in total.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- Harley
- Posts: 5763
- Joined: Mon May 08, 2006 2:45 pm
- Location: Christchurch, New Zealand - Authorised BFM Cab Builder
Re: Introducing SPL Chart
This compares a T48-24 with a T48-36 3015LF Loaded
Last edited by Harley on Mon Mar 02, 2009 12:40 pm, edited 1 time in total.
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: Introducing SPL Chart
SLA and TLAH
Code: Select all
[spl]SLA,TLAH&dbmin=70&dbmax=105[/spl]
Last edited by Chris_Allen on Sun Jan 07, 2018 9:52 am, edited 1 time in total.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
Re: Introducing SPL Chart
In that chart, I couldn't help but notice that, in a 24" T48, it shows a 3012LF beats a 3015LF.
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius, and a lot of courage, to move in the opposite direction."
Albert Einstein
Albert Einstein
Re: Introducing SPL Chart
Yes, but only from 48-55hz and 93-100hzMikey wrote:In that chart, I couldn't help but notice that, in a 24" T48, it shows a 3012LF beats a 3015LF.
TomS
TomS