Broken Links- re Driver Break in

Anything not covered elsewhere.
Post Reply
Message
Author
Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Broken Links- re Driver Break in

#1 Post by Grant Bunter »

I was reading an (old) electronics mag the other day and (re)discovered a "discussion" on driver break in.
Went to the "Look here first" section to refresh myself.
Low and behold, clicking on the gr research links returned a 404 error.
Couldn't find anything after diverting back to the home page either...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: Broken Links- re Driver Break in

#2 Post by Bill Fitzmaurice »


jimbo7
Posts: 849
Joined: Fri Dec 28, 2012 10:45 am
Location: St. Louis

Re: Broken Links- re Driver Break in

#3 Post by jimbo7 »

Grant Bunter wrote: Wed Jul 28, 2021 3:57 pm Low and behold, clicking on the gr research links returned a 404 error.
Couldn't find anything after diverting back to the home page either...
Wayback Machine:
https://web.archive.org/web/20120623052 ... m.php?f=10

Sometimes you can dig up old forum stuff from there
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Broken Links- re Driver Break in

#4 Post by Seth »

There's also a broken link in the "Got a question, look here first" section, in the Do you have a horn for an 18 inch driver? thread.

The first two images also don't load for me, even though the address appears to be correct (without www.)
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: Broken Links- re Driver Break in

#5 Post by Bill Fitzmaurice »

They're there for me.

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Broken Links- re Driver Break in

#6 Post by Seth »

:thumbsup:
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Post Reply