Snakes

Anything not covered elsewhere.
Message
Author
User avatar
Seth
Posts: 2733
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Snakes

#16 Post by Seth »

Bruce, those came out really nice. Great job with this project :thumbsup:
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

himhimself
Posts: 599
Joined: Fri Nov 13, 2015 9:34 pm
Location: Vancouver BC & Bloomington IN

Re: Snakes

#17 Post by himhimself »

Nicely done, Bruce! Well, except for those wonky crooked labels... :noob:
2xT30 (20", 3012LF)
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Snakes

#18 Post by Bruce Weldy »

himhimself wrote: Mon Apr 26, 2021 8:00 am Nicely done, Bruce! Well, except for those wonky crooked labels... :noob:
I always struggle with trying to get those danged things straight. They are small and stick to your fingers while you try to get 'em in narrow spaces....

Oh well, they are easily removed and replaced by anyone that wants to..... :mrgreen:

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Tom Smit
Posts: 7457
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Snakes

#19 Post by Tom Smit »

Would tweezers help, or needle nose pliers?

Nice job, by the way. :clap:
TomS

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Snakes

#20 Post by Bruce Weldy »

Tom Smit wrote: Mon Apr 26, 2021 9:45 pm Would tweezers help, or needle nose pliers?

Nice job, by the way. :clap:
Maybe, but the labels curl up a little even on short ones since they come off a roll inside the label maker......that's part of the problem with keeping them straight....

Not a big deal though.....they are going to get beat up anyway.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Dale Hammer
Posts: 112
Joined: Wed Apr 04, 2012 1:30 pm
Location: Topeka, Kansas

Re: Snakes

#21 Post by Dale Hammer »

Those look real nice.

himhimself
Posts: 599
Joined: Fri Nov 13, 2015 9:34 pm
Location: Vancouver BC & Bloomington IN

Re: Snakes

#22 Post by himhimself »

Ding ding ding. Just clicked that I will do something similar to make a GFIC box at the end of my fat power cable that plugs into my generator parallel out. I especially will steal the cable strain relief idea. Thanks for the inspiration, Bruce!
2xT30 (20", 3012LF)
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Snakes

#23 Post by Bruce Weldy »

himhimself wrote: Wed Apr 28, 2021 8:43 am Ding ding ding. Just clicked that I will do something similar to make a GFIC box at the end of my fat power cable that plugs into my generator parallel out. I especially will steal the cable strain relief idea. Thanks for the inspiration, Bruce!
The big box stores have plenty of choices in sizes.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply