Jig Thread

Anything not covered elsewhere.
Post Reply
Message
Author
User avatar
Bryan Cox
Posts: 174
Joined: Sun Nov 22, 2015 3:01 pm
Location: Minot AFB, ND

Jig Thread

#1 Post by Bryan Cox » Thu Oct 10, 2019 1:47 pm

Does anyone know of a jig thread on here? I've looked and looked but can't find it if there is one.

When HifiBob was building his massive system he used a ton of jigs and mentioned he'd make a thread with the jigs so I've been looking for it.

Thanks!
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 (3012LF) 20" wide

User avatar
J_Dunavin
Posts: 1032
Joined: Sun Jul 09, 2006 3:13 pm
Location: Appleton WI
Contact:

Re: Jig Thread

#2 Post by J_Dunavin » Thu Oct 10, 2019 1:55 pm

I don’t know one off hand, but I did make a sled and inlayed some T slots in there. Used it to clamp down some guides which helped a ton!
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba

User avatar
Bryan Cox
Posts: 174
Joined: Sun Nov 22, 2015 3:01 pm
Location: Minot AFB, ND

Re: Jig Thread

#3 Post by Bryan Cox » Thu Oct 10, 2019 7:42 pm

Thanks, J. I'll give that a shot. I'm going to build several jigs to help with the construction of my cabs and I thought it'd be cool if others already had it figured out. I'll post then here when I do.
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 (3012LF) 20" wide

Grant Bunter
Posts: 6173
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Jig Thread

#4 Post by Grant Bunter » Thu Oct 10, 2019 8:09 pm

Bigcox4002001 wrote:
Thu Oct 10, 2019 7:42 pm
Thanks, J. I'll give that a shot. I'm going to build several jigs to help with the construction of my cabs and I thought it'd be cool if others already had it figured out. I'll post then here when I do.
I know Leland and Harley have posted up a couple of pics over time of some jigs.
With my builds, I've made the following.
0 degree zero tolerance cutting sleds, small and large.
Melded piezo array jig.
2 different piezo cutting jigs.
Hand hold jig.
Dual NL4 dish jig.
Spring handle dish jig.


I haven't put up any pics though, they are specific to the tools I'm using, and some are in the plans and jig plans...
Built:
DR 250: x 2 (melded array) with March 2012 plans. 2 more under way with CD horn
T39's: 4 x 20" BP102 , 2 x 28" 3012lf.
WH8: x 3 with melded array.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
Tom Smit
Posts: 6829
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Jig Thread

#5 Post by Tom Smit » Thu Oct 10, 2019 11:04 pm

I found Hifibob's thread, and it showed a couple of jigs at the start. I didn't look further.
viewtopic.php?f=30&t=19854&hilit=the+journey+begins

I found another thread in the way-back machine. Beware, somebody added and extra "i" with an underline joining the two i's.
viewtopic.php?f=14&t=19028&p=272906&hil ... gs#p272906
TomS

User avatar
LelandCrooks
Posts: 7227
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Jig Thread

#6 Post by LelandCrooks » Mon Oct 14, 2019 2:26 pm

Oh man. I just threw out all my jigs or I'd post some pics. I don't need them anymore since I got my Shaper Cnc router.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
Bryan Cox
Posts: 174
Joined: Sun Nov 22, 2015 3:01 pm
Location: Minot AFB, ND

Re: Jig Thread

#7 Post by Bryan Cox » Sun Oct 20, 2019 3:59 pm

LelandCrooks wrote:
Mon Oct 14, 2019 2:26 pm
Oh man. I just threw out all my jigs or I'd post some pics. I don't need them anymore since I got my Shaper Cnc router.
No worries. When I start batch building I'm going to throw together jigs that help me. They absolutely will NOT be pretty or professional. But they will work and hopefully :fingers: be safe.

I'll post them here.
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 (3012LF) 20" wide

Post Reply