New Design Ideas??

Anything not covered elsewhere.
Message
Author
User avatar
Pedro Vila
Posts: 77
Joined: Mon Mar 10, 2014 8:24 pm

Re: New Design Ideas??

#16 Post by Pedro Vila » Thu Jan 17, 2019 11:11 am

SLA Pro 2x5" is too much in many cases. What is on the market is little or very expensive. A midpoint is necessary for the bars,restaurants, etc.

For example something like this works well:
https://www.l-acoustics.com/en/product/5xt/
https://lwspeakers.com/web/en/cinema-sp ... axial.html
Sorry for my English :wall:
Authorized Builder for Dominican Republic.

User avatar
Chris_Allen
Posts: 3249
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: New Design Ideas??

#17 Post by Chris_Allen » Thu Jan 17, 2019 11:23 am

Pedro Vila wrote:
Thu Jan 17, 2019 8:58 am
I think it could work with:

6 "FaitalPRO 6FE100
8 "- Dayton Audio PA200-8
8 "- Eminence Alpha-8A 8"

A little bit of EQ and it would sound good for little money.
 
What do you think about it?

PV
I believe the faitalpro 6FE200 is already in spec for SLA Pro.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10

CoronaOperator
Posts: 1646
Joined: Wed Mar 25, 2009 7:07 pm
Location: Medicine Hat, Alberta, Canada

Re: New Design Ideas??

#18 Post by CoronaOperator » Thu Jan 17, 2019 11:25 am

Pedro Vila wrote:
Thu Jan 17, 2019 11:11 am
SLA Pro 2x5" is too much in many cases. What is on the market is little or very expensive. A midpoint is necessary for the bars,restaurants, etc.

For example something like this works well:
https://www.l-acoustics.com/en/product/5xt/
https://lwspeakers.com/web/en/cinema-sp ... axial.html
In that case, buy one of these, put it in a box. Done deal, no plans required.
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience

User avatar
Pedro Vila
Posts: 77
Joined: Mon Mar 10, 2014 8:24 pm

Re: New Design Ideas??

#19 Post by Pedro Vila » Thu Jan 17, 2019 1:34 pm

That is not pro audio, does not apply. The sensitivity is very low, only 30w and fs is high.
It has to be a 6 "or 8" with piezo.
Sorry for my English :wall:
Authorized Builder for Dominican Republic.

Post Reply