Quick question -- how "bad" are these notches in 1016s? When they're glued to adjacent 1016s, are these gaps going to be significant/create air gaps or when they're placed on speaker foam will these gaps not matter?
Thanks
Notches in 1016s
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: Notches in 1016s
Cut down to size as recommended I doubt those gaps will remain.
-
- Posts: 53
- Joined: Sat Dec 18, 2010 9:29 pm
Re: Notches in 1016s
The notches on tweeters B, C, and D are after being cut (A is uncut). (Probably should have said that initially)
Re: Notches in 1016s
Are you building an SLA? Those tweets are likely okay, and, if not, you could add some adhesive mixed with your cut-offs and carefully fill the holes in. Use masking/painters tape to create a "form".
TomS