Notches in 1016s

Anything not covered elsewhere.
Post Reply
Message
Author
climbikejk
Posts: 53
Joined: Sat Dec 18, 2010 9:29 pm

Notches in 1016s

#1 Post by climbikejk »

Quick question -- how "bad" are these notches in 1016s? When they're glued to adjacent 1016s, are these gaps going to be significant/create air gaps or when they're placed on speaker foam will these gaps not matter?

Thanks
notches.jpg

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: Notches in 1016s

#2 Post by Bill Fitzmaurice »

Cut down to size as recommended I doubt those gaps will remain.

climbikejk
Posts: 53
Joined: Sat Dec 18, 2010 9:29 pm

Re: Notches in 1016s

#3 Post by climbikejk »

The notches on tweeters B, C, and D are after being cut (A is uncut). (Probably should have said that initially)

User avatar
Tom Smit
Posts: 7457
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Notches in 1016s

#4 Post by Tom Smit »

Are you building an SLA? Those tweets are likely okay, and, if not, you could add some adhesive mixed with your cut-offs and carefully fill the holes in. Use masking/painters tape to create a "form".
TomS

Post Reply