DJPhatman

Anything not covered elsewhere.
Message
Author
User avatar
Charles Jenkinson
Posts: 1125
Joined: Sat Aug 06, 2011 3:25 pm
Location: Manchester, UK

DJPhatman

#1 Post by Charles Jenkinson »

I was just having a mooch this morning and noticed I haven't seen DJPhatman here. Anyone know where he is? Last posted in January.
2xJ12L (3012HO) switchable/melded
2xT30

Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.

djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

Re: DJPhatman

#2 Post by djtrumptight »

He's still around,i see him on Facebook,i believe he has moved back here to Michigan.
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's

User avatar
Charles Jenkinson
Posts: 1125
Joined: Sat Aug 06, 2011 3:25 pm
Location: Manchester, UK

Re: DJPhatman

#3 Post by Charles Jenkinson »

That's good news. Just having time out.
2xJ12L (3012HO) switchable/melded
2xT30

Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.

User avatar
Tom Smit
Posts: 7457
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: DJPhatman

#4 Post by Tom Smit »

I was wondering the same a couple of weeks ago, and sent him a PM.
TomS

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: DJPhatman

#5 Post by Bruce Weldy »

I got a facebook reply from him on an event I sent out. Just a couple of days ago.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

ctmullins
Posts: 195
Joined: Thu May 13, 2010 9:05 am
Location: MS Coast

Re: DJPhatman

#6 Post by ctmullins »

I PM'ed him about a month ago, and yes, he's busy getting settled into his new place. He sounded fine, just busy, and a bit annoyed at the hassle of moving. Don't blame him a bit.
-todd

5 and 8 string bass | SansAmp | Crown | 2 x J110
2 x W8 panel-mount
2 x T39 24" 3012LF
4 x OT12 2512 melded (finally done!)

User avatar
Tom Smit
Posts: 7457
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: DJPhatman

#7 Post by Tom Smit »

Guess who forgot to change his location! He is not in Flo-rida anymore.
TomS

Blondetigger
Posts: 10
Joined: Sun Dec 30, 2018 9:55 am
Location: Waterford, MI

Re: DJPhatman

#8 Post by Blondetigger »

Djphatman has been back in Michigan since 2016. Not sure how long it has since he has posted anywhere on here. I am his daughter and sorry to say he just passed away 12 days ago. If someone could tell me where to go to add my location, that would be great. I have all of his parts for his builds.

User avatar
Tom Smit
Posts: 7457
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: DJPhatman

#9 Post by Tom Smit »

Hi Blondtigger. I am terribly sorry for your loss. I am saddened, and had wondered what was up since he had not posted in quite a while. I had met your father many years ago in Detroit after I had joined this forum. I will miss him. He had shared a lot of good information

To add your location, go to the top of the page and clicked on your user name on the top, right-hand side of the page. A dialogue box will open and allow you to click on "profile". Once you do that, a title will show "Viewing Profile", and the line right below has your name, and in brackets [edit profile]. Once there, you can add your location.
TomS

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: DJPhatman

#10 Post by Bruce Weldy »

Blondetigger wrote: Sun Dec 30, 2018 8:31 pm Djphatman has been back in Michigan since 2016. Not sure how long it has since he has posted anywhere on here. I am his daughter and sorry to say he just passed away 12 days ago. If someone could tell me where to go to add my location, that would be great. I have all of his parts for his builds.
Sorry to hear of your loss. The Phatman was a regular and always up for a spirited discussion. :mrgreen:

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Blondetigger
Posts: 10
Joined: Sun Dec 30, 2018 9:55 am
Location: Waterford, MI

Re: DJPhatman

#11 Post by Blondetigger »

Thank you, oh yes his discussions, He is always right in his mind :-)

Blondetigger
Posts: 10
Joined: Sun Dec 30, 2018 9:55 am
Location: Waterford, MI

Re: DJPhatman

#12 Post by Blondetigger »

Thank you Tom, his death was unexpected, he had a new girlfriend so his activities changed for a minute.

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: DJPhatman

#13 Post by Grant Bunter »

Blondetigger wrote: Sun Dec 30, 2018 9:10 pm Thank you, oh yes his discussions, He is always right in his mind :-)
Hi!
Kenneth was a friend of mine on facebook as well, and had been in touch through msging until around a couple of months ago.
Yes, the discussions were pretty much on the edge lol.
For whatever reason, his passing never came up on my feed, so quite surprised to hear this sad news.
So sorry to hear of his passing and all the best to you and the rest of the family...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Blondetigger
Posts: 10
Joined: Sun Dec 30, 2018 9:55 am
Location: Waterford, MI

Re: DJPhatman

#14 Post by Blondetigger »

thank you. i am not sure why no one saw the message on facebook. I will have to go on his, if i can get in and let everyone know :-(

himhimself
Posts: 599
Joined: Fri Nov 13, 2015 9:34 pm
Location: Vancouver BC & Bloomington IN

Re: DJPhatman

#15 Post by himhimself »

Very sorry for your loss. Always loved reading his posts.
2xT30 (20", 3012LF)
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas

Post Reply