DJPhatman
- Charles Jenkinson
- Posts: 1125
- Joined: Sat Aug 06, 2011 3:25 pm
- Location: Manchester, UK
DJPhatman
I was just having a mooch this morning and noticed I haven't seen DJPhatman here. Anyone know where he is? Last posted in January.
2xJ12L (3012HO) switchable/melded
2xT30
Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.
2xT30
Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.
-
- Posts: 823
- Joined: Tue Dec 15, 2009 6:08 pm
- Location: Detroit,Michigan
Re: DJPhatman
He's still around,i see him on Facebook,i believe he has moved back here to Michigan.
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
- Charles Jenkinson
- Posts: 1125
- Joined: Sat Aug 06, 2011 3:25 pm
- Location: Manchester, UK
Re: DJPhatman
That's good news. Just having time out.
2xJ12L (3012HO) switchable/melded
2xT30
Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.
2xT30
Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.
-
- Posts: 8325
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: DJPhatman
I got a facebook reply from him on an event I sent out. Just a couple of days ago.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: DJPhatman
I PM'ed him about a month ago, and yes, he's busy getting settled into his new place. He sounded fine, just busy, and a bit annoyed at the hassle of moving. Don't blame him a bit.
-todd
5 and 8 string bass | SansAmp | Crown | 2 x J110
2 x W8 panel-mount
2 x T39 24" 3012LF
4 x OT12 2512 melded (finally done!)
5 and 8 string bass | SansAmp | Crown | 2 x J110
2 x W8 panel-mount
2 x T39 24" 3012LF
4 x OT12 2512 melded (finally done!)
-
- Posts: 10
- Joined: Sun Dec 30, 2018 9:55 am
- Location: Waterford, MI
Re: DJPhatman
Djphatman has been back in Michigan since 2016. Not sure how long it has since he has posted anywhere on here. I am his daughter and sorry to say he just passed away 12 days ago. If someone could tell me where to go to add my location, that would be great. I have all of his parts for his builds.
Re: DJPhatman
Hi Blondtigger. I am terribly sorry for your loss. I am saddened, and had wondered what was up since he had not posted in quite a while. I had met your father many years ago in Detroit after I had joined this forum. I will miss him. He had shared a lot of good information
To add your location, go to the top of the page and clicked on your user name on the top, right-hand side of the page. A dialogue box will open and allow you to click on "profile". Once you do that, a title will show "Viewing Profile", and the line right below has your name, and in brackets [edit profile]. Once there, you can add your location.
To add your location, go to the top of the page and clicked on your user name on the top, right-hand side of the page. A dialogue box will open and allow you to click on "profile". Once you do that, a title will show "Viewing Profile", and the line right below has your name, and in brackets [edit profile]. Once there, you can add your location.
TomS
-
- Posts: 8325
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: DJPhatman
Sorry to hear of your loss. The Phatman was a regular and always up for a spirited discussion.Blondetigger wrote: ↑Sun Dec 30, 2018 8:31 pm Djphatman has been back in Michigan since 2016. Not sure how long it has since he has posted anywhere on here. I am his daughter and sorry to say he just passed away 12 days ago. If someone could tell me where to go to add my location, that would be great. I have all of his parts for his builds.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
-
- Posts: 10
- Joined: Sun Dec 30, 2018 9:55 am
- Location: Waterford, MI
Re: DJPhatman
Thank you, oh yes his discussions, He is always right in his mind
-
- Posts: 10
- Joined: Sun Dec 30, 2018 9:55 am
- Location: Waterford, MI
Re: DJPhatman
Thank you Tom, his death was unexpected, he had a new girlfriend so his activities changed for a minute.
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: DJPhatman
Hi!Blondetigger wrote: ↑Sun Dec 30, 2018 9:10 pm Thank you, oh yes his discussions, He is always right in his mind
Kenneth was a friend of mine on facebook as well, and had been in touch through msging until around a couple of months ago.
Yes, the discussions were pretty much on the edge lol.
For whatever reason, his passing never came up on my feed, so quite surprised to hear this sad news.
So sorry to hear of his passing and all the best to you and the rest of the family...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
- Posts: 10
- Joined: Sun Dec 30, 2018 9:55 am
- Location: Waterford, MI
Re: DJPhatman
thank you. i am not sure why no one saw the message on facebook. I will have to go on his, if i can get in and let everyone know
-
- Posts: 599
- Joined: Fri Nov 13, 2015 9:34 pm
- Location: Vancouver BC & Bloomington IN
Re: DJPhatman
Very sorry for your loss. Always loved reading his posts.
2xT30 (20", 3012LF)
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas