LED light bar mount
- Charles Jenkinson
- Posts: 1125
- Joined: Sat Aug 06, 2011 3:25 pm
- Location: Manchester, UK
LED light bar mount
Something I've been making. LED light bar mount brackets - right and left handed mounts to shine up and along a wall at an angle. The light bar itself, whilst a nice thing, only mounts from its ends, which isn't that versatile, so I went a bit further and created a pivoting clamp arrangement as well. It will now mount anywhere on the light stand and top T bar, within reason. Probably not as sensible overall as LED par cans, but what the heck.
2xJ12L (3012HO) switchable/melded
2xT30
Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.
2xT30
Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: LED light bar mount
Good work Charles
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
- Posts: 1648
- Joined: Wed Mar 25, 2009 7:07 pm
- Location: Medicine Hat, Alberta, Canada
Re: LED light bar mount
I like the angle mount. Duratex makes it look pro as well.
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience
Re: LED light bar mount
That is nice. I made a simple flat piece to attach to the legs that it came with. If I did it again, I'd use angle iron for support.
AudioFlyer DJ: DR200 & Titan39/Titan48
BASS: Combo Amp & Titan39
BASS: Combo Amp & Titan39