Snakes

Anything not covered elsewhere.
Message
Author
Seth
Posts: 1527
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Snakes

#16 Post by Seth » Sun Apr 25, 2021 11:54 pm

Bruce, those came out really nice. Great job with this project :thumbsup:
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

himhimself
Posts: 487
Joined: Fri Nov 13, 2015 9:34 pm
Location: Bloomington IN

Re: Snakes

#17 Post by himhimself » Mon Apr 26, 2021 8:00 am

Nicely done, Bruce! Well, except for those wonky crooked labels... :noob:
2xT30 (20", 3012LF)
2xT30 (21", 3012LF) in progress
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12

Bruce Weldy
Posts: 7546
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Snakes

#18 Post by Bruce Weldy » Mon Apr 26, 2021 8:29 am

himhimself wrote:
Mon Apr 26, 2021 8:00 am
Nicely done, Bruce! Well, except for those wonky crooked labels... :noob:
I always struggle with trying to get those danged things straight. They are small and stick to your fingers while you try to get 'em in narrow spaces....

Oh well, they are easily removed and replaced by anyone that wants to..... :mrgreen:

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Tom Smit
Posts: 7060
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Snakes

#19 Post by Tom Smit » Mon Apr 26, 2021 9:45 pm

Would tweezers help, or needle nose pliers?

Nice job, by the way. :clap:
TomS

Bruce Weldy
Posts: 7546
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Snakes

#20 Post by Bruce Weldy » Tue Apr 27, 2021 6:43 am

Tom Smit wrote:
Mon Apr 26, 2021 9:45 pm
Would tweezers help, or needle nose pliers?

Nice job, by the way. :clap:
Maybe, but the labels curl up a little even on short ones since they come off a roll inside the label maker......that's part of the problem with keeping them straight....

Not a big deal though.....they are going to get beat up anyway.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Dale Hammer
Posts: 103
Joined: Wed Apr 04, 2012 1:30 pm
Location: Topeka, Kansas

Re: Snakes

#21 Post by Dale Hammer » Tue Apr 27, 2021 7:39 am

Those look real nice.

himhimself
Posts: 487
Joined: Fri Nov 13, 2015 9:34 pm
Location: Bloomington IN

Re: Snakes

#22 Post by himhimself » Wed Apr 28, 2021 8:43 am

Ding ding ding. Just clicked that I will do something similar to make a GFIC box at the end of my fat power cable that plugs into my generator parallel out. I especially will steal the cable strain relief idea. Thanks for the inspiration, Bruce!
2xT30 (20", 3012LF)
2xT30 (21", 3012LF) in progress
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12

Bruce Weldy
Posts: 7546
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Snakes

#23 Post by Bruce Weldy » Wed Apr 28, 2021 8:57 am

himhimself wrote:
Wed Apr 28, 2021 8:43 am
Ding ding ding. Just clicked that I will do something similar to make a GFIC box at the end of my fat power cable that plugs into my generator parallel out. I especially will steal the cable strain relief idea. Thanks for the inspiration, Bruce!
The big box stores have plenty of choices in sizes.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply