New Gear!

Is this amp OK?
Post Reply
Message
Author
jimbo7
Posts: 849
Joined: Fri Dec 28, 2012 10:45 am
Location: St. Louis

New Gear!

#1 Post by jimbo7 »

Well, new to me...

I just got 2 lightly used amps off CL for what I think is a really good deal. For $200, I got a Crown XLS1000 and a Behringer iNuke 1000. Both have little to no rack rash and look cosmetically great. But I did break my rule. I didn't test it first. We met in a parking lot and the young guy was nice and everything checked out. I had a really long day and wanted to take a shower and rest badly. When I get home I'm gonna test em out. The Crown will be a learning curve to use. How well would it work with my Drive Rack?
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: New Gear!

#2 Post by Bruce Weldy »

jimbo7 wrote:Well, new to me...

I just got 2 lightly used amps off CL for what I think is a really good deal. For $200, I got a Crown XLS1000 and a Behringer iNuke 1000. Both have little to no rack rash and look cosmetically great. But I did break my rule. I didn't test it first. We met in a parking lot and the young guy was nice and everything checked out. I had a really long day and wanted to take a shower and rest badly. When I get home I'm gonna test em out. The Crown will be a learning curve to use. How well would it work with my Drive Rack?
Shouldn't be a learning curve on the Crown... the only real issue is whether you are running it stereo, Y input, or bridged. If you are using a driverack, no need to use any of the other DSP in that amp.

And don't rack the Crown and the Behringer together. Opposite airflow....

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

jimbo7
Posts: 849
Joined: Fri Dec 28, 2012 10:45 am
Location: St. Louis

Re: New Gear!

#3 Post by jimbo7 »

Bruce Weldy wrote:And don't rack the Crown and the Behringer together. Opposite airflow....
Oh, good to know. Never would've thought of that.

The plan is to use the crown for the subs. This is meant for a lighter mobile rig. Would I still need the drive rack for the tops?
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: New Gear!

#4 Post by Bruce Weldy »

jimbo7 wrote:
Bruce Weldy wrote:And don't rack the Crown and the Behringer together. Opposite airflow....
Oh, good to know. Never would've thought of that.

The plan is to use the crown for the subs. This is meant for a lighter mobile rig. Would I still need the drive rack for the tops?
The driverack controls the whole system....so yes.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: New Gear!

#5 Post by Grant Bunter »

How many T24's?

As to how well the XLS would do on sub duty will depend on how hard your pushing the system.

If it's one per channel, then you would need roughly 6dB on the brick wall limiter to reduce voltage to 35V.
But if it's a pair per channel, then it's a bit to close to the margin of the amps output limits to run them to max output for extended periods.

You should notice that the XLS 1000 only has peak limiter capability. That is not brick wall limiting...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

jimbo7
Posts: 849
Joined: Fri Dec 28, 2012 10:45 am
Location: St. Louis

Re: New Gear!

#6 Post by jimbo7 »

Check my sig. I only have 1 T24 for now. I know if I ever build, say a T39, I'll need a bigger amp for sure.

Grant: All amps run 1 speaker per channel. I only play inside, so 2 tops and 2 bottoms. An amp for the tops and amp for bottom. I think I can flip the fan around on the berry. All my other amp fans blow out the back.

I played around with the crown's settings last night. Do you really think I need to turn on any other settings if I have the driverack?
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: New Gear!

#7 Post by Bruce Weldy »

jimbo7 wrote: I played around with the crown's settings last night. Do you really think I need to turn on any other settings if I have the driverack?
No, just set it to Y input.....then you can add another sub and the signal will already be routed to the second channel.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

Re: New Gear!

#8 Post by djtrumptight »

I use a crown XLS 1500 to power 4 DR250's in stereo,i dont use any of the amps DSP features,i use the DSP in my dcx 2496.
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's

jimbo7
Posts: 849
Joined: Fri Dec 28, 2012 10:45 am
Location: St. Louis

Re: New Gear!

#9 Post by jimbo7 »

So its more for the weigh savings than the features? I'm fine with that. I hate lugging my iron amps around.
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: New Gear!

#10 Post by Bruce Weldy »

jimbo7 wrote:So its more for the weigh savings than the features?.
Absolutely!

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply