I don't know if my questions have already been answered. I looked couldn't find it, so here goes. I'm planning on building (2) 4' X 24" X 24" Titan 48s with a single Eminence 3015 speaker per cabinet. I understand that the speaker is 450 RMS/900 max. However, my smallest amp is a QSC 3602. I also just bought a DBX drive rack PA2. I've never owned a drive rack. Are there any special or particular safe settings limits on either or both units to help protect the speaker?
The QSC 3602 in (Stereo Mode) is rated at ◦8 Ohms FTC 20 Hz - 20 kHz 0.05% THD: 725 Watts
◦8 Ohms EIA 1 kHz 0.1% THD: 775 Watts. I don't know how accurate those numbers are, but I do know I shouldn't need to turn the attenuator beyond half way since the sub only needs 4 to 500 to put out the SPL that I want as a mobile dj.
(2) Titan 48s on a QSC 3602??
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: (2) Titan 48s on a QSC 3602??
Duplicate post. Closed.