So i recently bought a 300W plate amp for my TableTuba and i am going to build it into a wooden case. My question is: Can i build-in an analoge voltmeter directly parallel to the speaker output?
Voltmeter:
http://www.ebay.nl/itm/UPDATED-Analog-V ... 27f67293c5
Amplifier:
https://www.conrad.nl/nl/inbouw-verster ... 01044.html
Woofer:
JBL GTO804
build a voltmeter into plate amp
-
CoronaOperator
- Posts: 1648
- Joined: Wed Mar 25, 2009 7:07 pm
- Location: Medicine Hat, Alberta, Canada
Re: build a voltmeter into plate amp
Why not, however you will need an AC volt meter. The meter you listed is DC.
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience
Re: build a voltmeter into plate amp
Thanks for your reply. Thanks for reminding me about the AC, totally forgot about that 
-
Jake Jarmon
- Posts: 43
- Joined: Wed Oct 29, 2014 2:48 pm
- Location: Buda, TX
- Contact:
Re: build a voltmeter into plate amp
2 - T24 24" BP102 "Twinning"
2 - OT112 Delta Pro 12 Melded Array **In Progress**
2 - OT112 Delta Pro 12 Melded Array **In Progress**
Re: build a voltmeter into plate amp
And why should i use that instead of just buying an AC voltmeter and connect it parallel to the speaker output?Jake Jarmon wrote:https://www.parts-express.com/yuan-jing ... --320-6550