Just in case you would want to take eighty T48s up to thermal limits:
http://www.pknc.com/3phase_eng.html
For ~$24k, looks like a good deal!
Amp porn....
-
- Posts: 676
- Joined: Tue Apr 30, 2013 5:56 pm
- Location: Colonial Beach VA
Amp porn....
BFM rig:
6 OT12
4 T48
4 WH8
Other:
56 box Electrotec LabQ rig
Way too many cables
6 OT12
4 T48
4 WH8
Other:
56 box Electrotec LabQ rig
Way too many cables
Re: Amp porn....
TomS
Re: Amp porn....
I cannot imagine the power pins on that little guy carrying 40 or 80 amps of current without melting.
AC Power input in Three Phase mode : 3x 400V (25A**) no Neutral connection needed
AC Power input in Single Phase mode: 230V (63A**)
Operational AC Voltage range in Three Phase mode : 3X 208V- 3X480V 45...65Hz operational.. if single phase loss
Operational AC Voltage range in Single Phase mode: 90V- 275V** 45...65Hz 400Vac proof in single-phase mode
Maximum AC line current draw in Three Phase mode: 3X 32A (Separated AC Power limiter for AB and CD Channels)
Maximum AC line current draw in Single Phase mode: 80A
AC Power input in Three Phase mode : 3x 400V (25A**) no Neutral connection needed
AC Power input in Single Phase mode: 230V (63A**)
Operational AC Voltage range in Three Phase mode : 3X 208V- 3X480V 45...65Hz operational.. if single phase loss
Operational AC Voltage range in Single Phase mode: 90V- 275V** 45...65Hz 400Vac proof in single-phase mode
Maximum AC line current draw in Three Phase mode: 3X 32A (Separated AC Power limiter for AB and CD Channels)
Maximum AC line current draw in Single Phase mode: 80A
-
- Posts: 1648
- Joined: Wed Mar 25, 2009 7:07 pm
- Location: Medicine Hat, Alberta, Canada
Re: Amp porn....
It uses a modified MIL-DTL-C5015 connector. The specs on these can be found here:http://www.5015connectors.co.uk/LMJ-Thr ... ctors.html
It seems the largest pins can handle 150amps. They are very short so no different than a fuse. Might want to dry your hand first before you hot plug that cable in .
It seems the largest pins can handle 150amps. They are very short so no different than a fuse. Might want to dry your hand first before you hot plug that cable in .
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience
Re: Amp porn....
Yikes! 256 volts @ 130 amps output??? You can weld with those speaker cables.
2 THTs, 2 TLAH, SLA curved, 1 8-AT, 1 AT JBL 1002D, 4 Otop12s, Jack 12, TT with Eminence 10", 2 SLAs, 1 T30 slim, 2 T30s (2-10" each), SLA Pros, TrT.
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Amp porn....
I was talking to a professional sound engineer a couple of weeks ago. They had 2 400a gennies just to run the subwoofers. 325kw of amplifiers.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com