Deton Core series Amps

Is this amp OK?
Post Reply
Message
Author
User avatar
cave
Posts: 102
Joined: Sat Apr 24, 2010 12:08 am
Location: ACCRA GHANA
Contact:

Deton Core series Amps

#1 Post by cave »

What do you think about the spec of the Deton Core Series Amps?



Features:
· Advanced switch-model power supply technology for high performance and compact size.
· Power factor correction(PFC).
· Perfect protection(Soft start, clip limiter, thermal limiter, power limiter, DC,VHF,AC, short-circuit).
· High and rigid enclosure.
· Overall light weight-all models only 6.2kKg.
· Variable speed fan with low noise.
· Input Sensitivity:1V
· Power output(EIA 1KHZ 1% THD): 4Ω@1100W+1100W(CORE650)
4Ω@1450W+1450W(CORE850)
4Ω@1800W+1800W(CORE1050)
· Bridge output power: 8Ω@2200W(CORE650)
8Ω@2900W(CORE850)
8Ω@3600W(CORE1050)
· Signal\clip and limiter LED indicators to monitor performance.
· Input Impedance: 10Kohms unbalanced,10Kohms balanced.
   
CORE series ditigal amplifier is designed to meet the specialized needs of sound contractors.Three models,the core650, core850 and core1050.CORE amplifier are based on an improved version of PWM technology, equipped with very high efficient and reliable switching power supply with power factor correction(PFC)。
With the Muservopower(TM)and ToneAdjust(TM) technology。CORE amplifier take your sound to a whole new level. Not only does it give you tighter bass and clean transparent highs.it also cuts waste heat,boosts reliability and gets rid of unwanted noise and hum.
Last edited by cave on Tue Apr 08, 2014 2:29 pm, edited 1 time in total.
Built 2 x DR 250
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console


http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Denon Core series Amps

#2 Post by Bruce Weldy »

Chinese made......never heard of 'em. I'd stick with good brand names if you can. Crown, QSC, etc.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Denon Core series Amps

#3 Post by DJPhatman »

Pretty much all amps are made in China. That one appears to be a knock-off, which almost always are of poor quality. PulseMan has reported very good success with "Sync" brand amps. but, a +1 to Bruce Weldy. Stick to well-known, service proven reliability.
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28620
Joined: Tue May 02, 2006 5:59 pm

Re: Denon Core series Amps

#4 Post by Bill Fitzmaurice »

They don't appear to be sold in the US, so it's not likely anyone here will have experience with them.

User avatar
Bas Gooiker
Posts: 752
Joined: Fri Jul 06, 2012 5:05 pm

Re: Deton Core series Amps

#5 Post by Bas Gooiker »

I don't know about their switchmode amps, but their conventional super heavyweights are great value for money.
http://www.deton.com/html/amp_Aone.htm will do 4 ohm bridge all day long but need a good limiter to keep them in line.
Life is just a game, don't take it to seriously!

User avatar
cave
Posts: 102
Joined: Sat Apr 24, 2010 12:08 am
Location: ACCRA GHANA
Contact:

Re: Deton Core series Amps

#6 Post by cave »

We tried two OTop 12 Jarrays with the deton core 1050 and it was stupidly loud with a lot of juice left on the amp. We intend to run four of the amps for the eight tops bi-amped.
Built 2 x DR 250
Building 8 DR 250
Built 8 x OTOP 12 JARRAY
Built 2 TITAN 48
48ch & 32ch Sofware Audio Console


http://billfitzmaurice.info/forum/viewt ... 30&t=21253
http://billfitzmaurice.info/forum/viewt ... 13&t=22092

Post Reply