Send a network notification (email, software, whatever) when it faults, overheats, etc. These are for a mostly unmonitored paging environment and it would take a long while to be noticed if they're not monitored.
Any ideas?
Looking for an amp that will...
-
BrentEvans
- Posts: 3044
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Looking for an amp that will...
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
-
Grant Bunter
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Looking for an amp that will...
Brent,
Line voltage systems or "ordinary" amps?
A quick google shows:
Powersoft
Yamaha XP and XH
QSC CX168
series amps all claim to have remote monitoring via PC.
The QSC needs an add on accessory, the CM16a to monitor.
If the amp can be monitored on PC, I guess a software guru could knock up a programme that would/could notify by one or all the methods you mentioned in the event of a fault...
Line voltage systems or "ordinary" amps?
A quick google shows:
Powersoft
Yamaha XP and XH
QSC CX168
series amps all claim to have remote monitoring via PC.
The QSC needs an add on accessory, the CM16a to monitor.
If the amp can be monitored on PC, I guess a software guru could knock up a programme that would/could notify by one or all the methods you mentioned in the event of a fault...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
BrentEvans
- Posts: 3044
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Re: Looking for an amp that will...
The yamaha looks interesting... I also have been looking at some of the Crown products which have error reporting through Hi-Q/System Architect.
I was hoping for a product that could generate an email error notification without an intermediate software platform, but none of them seem to do that.
I was hoping for a product that could generate an email error notification without an intermediate software platform, but none of them seem to do that.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.