THTLP Dual Lab 12

For livingroom sound better than in a theatre.
Post Reply
Message
Author
mj90210
Posts: 79
Joined: Fri Feb 03, 2017 2:12 pm
Location: Montana-USA

THTLP Dual Lab 12

#1 Post by mj90210 »

I am assuming a dual Lab 12 would be an option in a THTLP. What would be the minimum width?
Thank You All for Your Time!!...Really!

Built:
2xDR300's
4xDual-30” Tuba 60’s
Simplex 21" Eminence NSW6021
1x20” THT
TLAH‘S
SLA Center-9 driver and Surrounds
SLA pros
TrT 10" Driver-10" Wide
Auto Tuba 10" Driver

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: THTLP Dual Lab 12

#2 Post by Bruce Weldy »

Only a 15 or single 12 is listed in the plans....no dual 12. I suppose you could do it, but you'd probably want to go out to 30 inches......best see if Bill chimes in on this.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: THTLP Dual Lab 12

#3 Post by Bill Fitzmaurice »

You can't smooth room modes with two twelves when they're both in the same enclosure.

mj90210
Posts: 79
Joined: Fri Feb 03, 2017 2:12 pm
Location: Montana-USA

Re: THTLP Dual Lab 12

#4 Post by mj90210 »

I should of clarified my goal earlier.

I have space for two 24” and larger thtlp’s and have quite a few lab 12’s not being used. Instead of buying two 15” Daytons, I figured I could easily load the LP version with the lab 12’s that aren’t being used.

Thanks
Thank You All for Your Time!!...Really!

Built:
2xDR300's
4xDual-30” Tuba 60’s
Simplex 21" Eminence NSW6021
1x20” THT
TLAH‘S
SLA Center-9 driver and Surrounds
SLA pros
TrT 10" Driver-10" Wide
Auto Tuba 10" Driver

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: THTLP Dual Lab 12

#5 Post by Bill Fitzmaurice »

A 2x12 would have to be twice the panel width of a 1x12.

Post Reply