Yep, you need to make sure your DRPA has EQ, sub synth, etc. turned off, and play pink noise through the amp with speakers disconnected to see how much voltage your amp puts out.rec wrote:So after doing some more reading, it looks like the limiter "Threshold" is what limits the signal
Is this correct?
Note the voltage on your amp with attenuator settings at -9, -6, -3, 0, etc. If you want to limit your Otops at 30 volts, for example, and -3 on your power amp is 30 volts, set the DRPA limiter threshold to -3.
Thats interesting about the LR slope, I'll check it out on mine. I have the older model, and am thinking the LR settings only went to LR12, whereas the BW choices went to BW24.