I have my sla pro's with the 5" drivers done, and a lovely13" wide t39 with bp102, powered by a carvin dcm2004lx. I'm a singer guitar player who plays a lot of alternating bass style, so I think I'd like my crossover set kinda high to get my bass strings into the sub.
I have my first gig with these tomorrow night in a small room, and I don't really have time to just play with settings, so I'm hoping for some suggestions. Right now I have both crossing over at 150hz. I can sing down to 80 hz.
I read a bit about aux feeding the sub, and that does sound like a nice idea to have a x over point high and then send a little less vocal to the sub mix as I found a few notes get boomy in the voice.
I use the first aux send to take my clean guitar, then insert compression, then to the aux that feeds the stereo effects, so I can blend a clean and effects tone.
Thanks for the suggestions.
Cross over suggestions please
-
- Posts: 46
- Joined: Wed Apr 20, 2016 4:34 pm
Cross over suggestions please
Sla Pro 5" drivers, t39 10" driver
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Cross over suggestions please
I'd never go over 120. Actually, I'd run at 95-100.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
- Bill Fitzmaurice
- Site Admin
- Posts: 28645
- Joined: Tue May 02, 2006 5:59 pm
Re: Cross over suggestions please
That's fixed with EQ, not the crossover frequency.Rob Shasta Guitar wrote: I found a few notes get boomy in the voice.