Allen & Heath ZED 22FX - Info
- cliffhanger
- Posts: 79
- Joined: Tue Aug 18, 2009 11:19 am
- Location: Rome, NY
Allen & Heath ZED 22FX - Info
Anyone familiar with this board know if it plays well with ProTools LE? My buddy has one and we were recording the other day. He was sending the signal from the mixer into an mbox as stereo L and R. Just wondering if he sent the signal using the USB if it would work in ProTools that way each input would be separate in PT and could be tweaked later.
OT12 2512 Driver Only
Jack 2510 Driver Only
AT MCM 2421
On Deck...
Melded Tweeter Array added to OT12
A brother for the Jack 10
Jack 2510 Driver Only
AT MCM 2421
On Deck...
Melded Tweeter Array added to OT12
A brother for the Jack 10
-
- Posts: 8322
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Allen & Heath ZED 22FX - Info
http://www.allen-heath.com/uk/Products/ ... Id=ZED22FX
Click on documents....then download the PDF file.....all of the answers should be there.
Click on documents....then download the PDF file.....all of the answers should be there.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
- Doug Hart
- Posts: 675
- Joined: Sat Nov 22, 2008 10:04 pm
- Location: Oklahoma - Authorized Builder
- Contact:
Re: Allen & Heath ZED 22FX - Info
The USB is just a stereo out. You only get two channels.
Doug Hart, Owner
dB Pro Audio
a division of: Hart Designs Etc...
Authorized Builder
http://www.facebook.com/dbProAudio
http://www.hartdesignsetc.com
"The greatest tragedy is people who have sight, but no vision" - Hellen Keller
dB Pro Audio
a division of: Hart Designs Etc...
Authorized Builder
http://www.facebook.com/dbProAudio
http://www.hartdesignsetc.com
"The greatest tragedy is people who have sight, but no vision" - Hellen Keller
Re: Allen & Heath ZED 22FX - Info
+1 watch out for that. It should work though if he's got the latest protools. It runs on any interface. I use an RME Multiface II on PCIe with Sonar X1.Doug Hart wrote:The USB is just a stereo out. You only get two channels.
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
- mikeratliff
- Posts: 44
- Joined: Sat Jul 16, 2011 2:24 pm
- Location: chicago
Re: Allen & Heath ZED 22FX - Info
Don,
What do you think of Sonar X1.
What do you think of Sonar X1.
Re: Allen & Heath ZED 22FX - Info
Love it! I love the revisions to the interface. It's been very stable for me too. I've had several versions way back to XL.mikeratliff wrote:Don,
What do you think of Sonar X1.
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
- Doug Hart
- Posts: 675
- Joined: Sat Nov 22, 2008 10:04 pm
- Location: Oklahoma - Authorized Builder
- Contact:
Re: Allen & Heath ZED 22FX - Info
Same here. Started with Cakewalk 9 I believe... just got X1 a few weeks ago. Love it !!!doncolga wrote:Love it! I love the revisions to the interface. It's been very stable for me too. I've had several versions way back to XL.
Doug Hart, Owner
dB Pro Audio
a division of: Hart Designs Etc...
Authorized Builder
http://www.facebook.com/dbProAudio
http://www.hartdesignsetc.com
"The greatest tragedy is people who have sight, but no vision" - Hellen Keller
dB Pro Audio
a division of: Hart Designs Etc...
Authorized Builder
http://www.facebook.com/dbProAudio
http://www.hartdesignsetc.com
"The greatest tragedy is people who have sight, but no vision" - Hellen Keller