Ashley protea 4.24c

The hows and whys of running sound.
Post Reply
Message
Author
ketoet
Posts: 317
Joined: Thu Jul 08, 2010 3:19 pm
Location: kortrijk , Belgium

Ashley protea 4.24c

#1 Post by ketoet » Sat Nov 10, 2018 3:51 am

Hello

Would a Ashley protea 4.24c work as a processor for a workshop bfm system? Especially are the limiters adequate?
I can get one for 30€ on a local auction.
I already have old amps i could use so this would be a cheap way to protect the subs

Ketoet
building BFM speakers isn't a hobby , it's an addiction

1 x THT
1 x autotuba
2 x dr250 melded

2 x wedgehorn 10
2 x tlah

Bruce Weldy
Posts: 6433
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Ashley protea 4.24c

#2 Post by Bruce Weldy » Sat Nov 10, 2018 8:24 am

That's a great deal and will work fine.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

ketoet
Posts: 317
Joined: Thu Jul 08, 2010 3:19 pm
Location: kortrijk , Belgium

Re: Ashley protea 4.24c

#3 Post by ketoet » Sun Nov 11, 2018 4:47 am

Cool, as of this moment i'm the highest bidder ,👍.
Now off topic but dsp related. Is the nx3000d the newer
Version of the inuke 3000dsp? My xti amp has been giving me issues and needs replacement.

Greetz ketoet
building BFM speakers isn't a hobby , it's an addiction

1 x THT
1 x autotuba
2 x dr250 melded

2 x wedgehorn 10
2 x tlah

CoronaOperator
Posts: 1485
Joined: Wed Mar 25, 2009 7:07 pm
Location: Medicine Hat, Alberta, Canada

Re: Ashley protea 4.24c

#4 Post by CoronaOperator » Sun Nov 11, 2018 5:18 am

ketoet wrote:
Sun Nov 11, 2018 4:47 am
Is the nx3000d the newer
Version of the inuke 3000dsp? My xti amp has been giving me issues and needs replacement.
Yes, pretty much just a (much needed) face lift and an impedance compensation circuit added (the original high frequency response would change slightly as the impedance changed). These new ones apparently do not.

I hope you win that processor, its a $1k unit new. Happy bidding, don't let someone steal it away from you the last 5 seconds.
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience

CoronaOperator
Posts: 1485
Joined: Wed Mar 25, 2009 7:07 pm
Location: Medicine Hat, Alberta, Canada

Re: Ashley protea 4.24c

#5 Post by CoronaOperator » Sun Nov 11, 2018 5:20 am

ketoet wrote:
Sat Nov 10, 2018 3:51 am
Would a Ashley protea 4.24c work as a processor for a workshop bfm system? Especially are the limiters adequate?
If you need limiters for a workshop system then you rock out harder than I do while building! Do you use extreme vibration curing adhesive?
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience

User avatar
Tom Smit
Posts: 6595
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Ashley protea 4.24c

#6 Post by Tom Smit » Mon Nov 12, 2018 1:11 am

:loler:
TomS

ketoet
Posts: 317
Joined: Thu Jul 08, 2010 3:19 pm
Location: kortrijk , Belgium

Re: Ashley protea 4.24c

#7 Post by ketoet » Mon Nov 12, 2018 6:55 am

Hey all those tools make a lot of noise so we have to crank it up! 😂
No the system installed in the workshop is also used when we do birthday party's and such there. Things can get loud!
I wasn't really planning on using a dsp but it's so cheap that lookew like a good idea. I hope the price doesn't go up to much

Greetz ketoet
building BFM speakers isn't a hobby , it's an addiction

1 x THT
1 x autotuba
2 x dr250 melded

2 x wedgehorn 10
2 x tlah

ketoet
Posts: 317
Joined: Thu Jul 08, 2010 3:19 pm
Location: kortrijk , Belgium

Re: Ashley protea 4.24c

#8 Post by ketoet » Mon Nov 12, 2018 2:36 pm

Unfortunately i didn't win the auction for the protea.
It went up to 240€ in the end and that's way more then i was willing to pay. I'll stay on the lookout for another chance

Greetz ketoet
building BFM speakers isn't a hobby , it's an addiction

1 x THT
1 x autotuba
2 x dr250 melded

2 x wedgehorn 10
2 x tlah

Post Reply