Finished my Simplexx 210 and...

Our easiest to build speaker lineup.
Post Reply
Posts: 1
Joined: Mon Oct 24, 2016 9:31 pm

Finished my Simplexx 210 and...

#1 Post by bluesfanjp » Sat Dec 07, 2019 2:10 pm

...its awesome!

I got the flat pack from and the quality of the material and workmanship was exceptional. Everything fit perfect including the internal bracing. I have to take some credit for getting the baffle set correctly. I'm using the Deltalite 2510's. The grill is from Reliable Hardware in CA. Its nice thick material and doesn't make any noise. If you order a custom grill for your project do not get the thinner 22ga material some makers offer. I added a small extension to the face of the cabinet so I could space the grill out far enough and still keep it slightly under flush. The finished assembly is 52lbs with the 16ga grill. Lite weight wasn't my goal but this is very manageable and I can still do a 1trip load in.

Was it cheap to build? Nope. Was it worth it? Yup. I would do it again. I'm driving it with one of the new Fender Rumble 800 heads and could be happier with the tone and volume I get from it.
cabinet1.png (105.38 KiB) Viewed 706 times

User avatar
Tom Smit
Posts: 6938
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Finished my Simplexx 210 and...

#2 Post by Tom Smit » Sat Dec 07, 2019 11:00 pm

Good job! Thumbs up.

Posts: 971
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA

Re: Finished my Simplexx 210 and...

#3 Post by SethRocksYou » Sun Dec 08, 2019 2:53 am

That's pretty sweet. Congrats. Well done :thumbsup:

User avatar
Posts: 7230
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana

Re: Finished my Simplexx 210 and...

#4 Post by LelandCrooks » Sun Dec 08, 2019 8:49 am

Nice. Well done.
If it's too loud, you're even older than me! Like me.

Posts: 44
Joined: Tue Mar 17, 2009 6:45 pm
Location: Lakeside, CA

Re: Finished my Simplexx 210 and...

#5 Post by Ben » Tue Dec 10, 2019 5:42 pm

Very nice!
Jack 12 (2)
Wedgehorn 6 (4)

User avatar
Bryan Cox
Posts: 316
Joined: Sun Nov 22, 2015 3:01 pm
Location: Minot AFB, ND

Re: Finished my Simplexx 210 and...

#6 Post by Bryan Cox » Mon Dec 16, 2019 7:09 pm

Very professional look, bluesfanjp. The BF badge is a nice touch as well.
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide

Post Reply