Simplexx 1x12 question

Our easiest to build speaker lineup.
Post Reply
Message
Author
Verb
Posts: 9
Joined: Mon Sep 22, 2014 6:23 pm

Simplexx 1x12 question

#1 Post by Verb » Tue Oct 26, 2021 8:57 am

Is it OK to build the S 1x12 as a taller rather than wider cab?
I would leave the handle in the designed position so it would be on the top. If built like this, would it be best to raise the 12 up a little, and move the tweeter over so that it wouldn't be directly above the 12?

User avatar
Bill Fitzmaurice
Site Admin
Posts: 27768
Joined: Tue May 02, 2006 5:59 pm

Re: Simplexx 1x12 question

#2 Post by Bill Fitzmaurice » Tue Oct 26, 2021 10:30 am

Rotate the cab 90 degrees, keeping the tweeter at the top. Leave the woofer position the same, but move the tweeter to the opposite side of the baffle for better balance. It would have to be a strap handle to avoid the bracing.

Verb
Posts: 9
Joined: Mon Sep 22, 2014 6:23 pm

Re: Simplexx 1x12 question

#3 Post by Verb » Tue Oct 26, 2021 10:47 am

Bill Fitzmaurice wrote:
Tue Oct 26, 2021 10:30 am
Rotate the cab 90 degrees, keeping the tweeter at the top. Leave the woofer position the same, but move the tweeter to the opposite side of the baffle for better balance. It would have to be a strap handle to avoid the bracing.
Thank you

Post Reply