4) Titan 48's and 4) DR 250's 7-14-2019

Post links to youtube videos of your cabs.
Forum rules
Only links to videos of our cabs are allowed. You tube only, no facebook.
Post Reply
Message
Author
djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

4) Titan 48's and 4) DR 250's 7-14-2019

#1 Post by djtrumptight »

Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's

User avatar
J_Dunavin
Posts: 1260
Joined: Sun Jul 09, 2006 3:13 pm
Location: Appleton WI
Contact:

Re: 4) Titan 48's and 4) DR 250's 7-14-2019

#2 Post by J_Dunavin »

Nice!! How far back do you figure you walked?
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: 4) Titan 48's and 4) DR 250's 7-14-2019

#3 Post by Seth »

Nice :thumbsup:
Do you have them EQ'd at all?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

Re: 4) Titan 48's and 4) DR 250's 7-14-2019

#4 Post by djtrumptight »

I dont really know how far it actually was but im thinking possibly 80 yards or more.Next week im going back to the same location but im gonna set up in a different area with both stacks facing the same way,i had them slightly splayed outward.Im gonna mark 4 spots at 25,50,75, and 100 yards.The reason i was showing the green dinosaur was to try to show the distance i was from the system.

Yes sir the tops are EQ'd but not alot,i like to bump the DR's 3khz area with a band pass filter and i tame that 10Khz hump a bit and boost the high end a bit where it falls off rapidly with a 19khz low pass.
Subs have a slight boost at 60hz with a bad pass filter,even tho they were stacked i kept the hi pass at 40hz instead of lowering it to 35hz.
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: 4) Titan 48's and 4) DR 250's 7-14-2019

#5 Post by Seth »

Nice. Thanks for sharing. I've watched all your other vids over the years too. Keep 'em coming :thumbsup:
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

Re: 4) Titan 48's and 4) DR 250's 7-14-2019

#6 Post by djtrumptight »

ice. Thanks for sharing. I've watched all your other vids over the years too. Keep 'em coming :thumbsup:

youre welcomed
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's

Post Reply