DR250 and T39

Post links to youtube videos of your cabs.
Forum rules
Only links to videos of our cabs are allowed. You tube only, no facebook.
Post Reply
Message
Author
Lastcat
Posts: 232
Joined: Tue Aug 17, 2010 12:33 pm
Location: Washington State
Contact:

DR250 and T39

#1 Post by Lastcat »



This was a HS Prom at a Car Dealership, May 18-2013. 2 DR250's and 4 T39 24" using 3012LF.
Currently Built:
4 T39 24" 3012LF
4 WH10 2510
4 DR200 Pro 8a
4 DR250 2510
**************

User avatar
doncolga
Posts: 1967
Joined: Thu Jul 01, 2010 3:01 pm
Location: Statesboro, GA
Contact:

Re: DR250 and T39

#2 Post by doncolga »

Sounds really good man. :clap: How were you setup?...I'd guess you were able to do some boundary loading?
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW

Lastcat
Posts: 232
Joined: Tue Aug 17, 2010 12:33 pm
Location: Washington State
Contact:

Re: DR250 and T39

#3 Post by Lastcat »

Thanks Don. Just the DR250's about 30' apart, up about 9'. Had the 4 T39's behind the left DR250. T39's stacked "V" style, without the plate. No corner or wall loaded. Bass was plenty. Used to use the V Plate at first, then started without it, to speed setup and tear down, except when I get into bigger rooms and outside, then I will add the V Plate.

This is what I use for Camera. Not the best on the Highs, but great on the Lows.

Image
Currently Built:
4 T39 24" 3012LF
4 WH10 2510
4 DR200 Pro 8a
4 DR250 2510
**************

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: DR250 and T39

#4 Post by DJPhatman »

Lastcat wrote:...DR250's about 30' apart, up about 9'.
I wanted to ask you about why you had your tops so high? Were the highs fading in and out all over the room, like they were in the video?
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

Disco-inferno
Posts: 219
Joined: Thu Mar 15, 2012 6:19 pm
Location: Tilburg, Netherlands

Re: DR250 and T39

#5 Post by Disco-inferno »

Lastcat wrote:This is what I use for Camera. Not the best on the Highs, but great on the Lows.

Image
I wanted to ask you about that, the highs sounded a little harsh in the video. Apart from that I think this is a very nice and clean sounding setup. :clap:

Lastcat
Posts: 232
Joined: Tue Aug 17, 2010 12:33 pm
Location: Washington State
Contact:

Re: DR250 and T39

#6 Post by Lastcat »

DJPhatman wrote:
Lastcat wrote:...DR250's about 30' apart, up about 9'.
I wanted to ask you about why you had your tops so high? Were the highs fading in and out all over the room, like they were in the video?
9' is fine. On the left, it was actually over the top of a partition, you can barely see. Highs fading? Not at all, Flip Up Camera is not the best with the highs, but great with the lows.
Currently Built:
4 T39 24" 3012LF
4 WH10 2510
4 DR200 Pro 8a
4 DR250 2510
**************

User avatar
Tom Smit
Posts: 7457
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: DR250 and T39

#7 Post by Tom Smit »

Sounded pretty good!
TomS

Post Reply