1min System Setup
Forum rules
Only links to videos of our cabs are allowed. You tube only, no facebook.
Only links to videos of our cabs are allowed. You tube only, no facebook.
1min System Setup
Authorized Builder
- 6 DR290
- Omni10.5
- AT, TAT
- Tuba 48
- 2 WH10
- Truck Tuba
http://www.boniton.co.il
http://www.bt-12.com Balanced Tilting Sounds Better...
- 6 DR290
- Omni10.5
- AT, TAT
- Tuba 48
- 2 WH10
- Truck Tuba
http://www.boniton.co.il
http://www.bt-12.com Balanced Tilting Sounds Better...
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: 1min System Setup
Very clever thee be...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: 1min System Setup
Watching your video made my eyes twitch!
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice
- Drey Chennells
- Posts: 1377
- Joined: Sun May 17, 2009 10:12 pm
- Location: Central FL ~Authorized Builder
- Contact:
Re: 1min System Setup
How much (or little) voltage did you end up putting to the DRs?
"Things happen, but music stays in your blood forever~." bf
InfraCoustik
Consulting/Design/Fabrication
Authorized BF Builder
http://www.infracoustik.com/
info@infracoustik.com
InfraCoustik
Consulting/Design/Fabrication
Authorized BF Builder
http://www.infracoustik.com/
info@infracoustik.com
Re: 1min System Setup
I love seeing N.Webbers work. Buaetiful craftsman and a fine engineer.
Nim do you have any vids of performances you can show?
Nim do you have any vids of performances you can show?
4 20" T39(built)
2 WH8(built)
3 WH10(own)
4 DR200(own)
1 Jack 12(built)
SAC 24 Channel Mixer
SAW STUDIO Recording
Re: 1min System Setup
1 + 2 = 3 seconds
3 x 60 (vid length) = 180
180/60 = 3
Three minutes to set up the whole thing? (once the parts were put in location?)
3 x 60 (vid length) = 180
180/60 = 3
Three minutes to set up the whole thing? (once the parts were put in location?)
TomS
Re: 1min System Setup
Thanks guys...
This vid. is after rendering so the frame per second rate isn't standard.
The original shot was 1:30h long and consisted of 1800 frames...
Didn't measure. but I guess I was hovering under 50% of the cabs potential.Drey Chennells wrote:How much (or little) voltage did you end up putting to the DRs?
Sorry no. only still pics.Haysus wrote:Nim do you have any vids of performances you can show?
I don't follow your math.Tom Smit wrote:1 + 2 = 3 seconds
3 x 60 (vid length) = 180
180/60 = 3
Three minutes to set up the whole thing? (once the parts were put in location?)
This vid. is after rendering so the frame per second rate isn't standard.
The original shot was 1:30h long and consisted of 1800 frames...
Authorized Builder
- 6 DR290
- Omni10.5
- AT, TAT
- Tuba 48
- 2 WH10
- Truck Tuba
http://www.boniton.co.il
http://www.bt-12.com Balanced Tilting Sounds Better...
- 6 DR290
- Omni10.5
- AT, TAT
- Tuba 48
- 2 WH10
- Truck Tuba
http://www.boniton.co.il
http://www.bt-12.com Balanced Tilting Sounds Better...
Re: 1min System Setup
Hah! Okay! You do understand ......and I was wrong. (In your YT comments you said that there was a 2 second interval between frames, and the vid was 60 seconds long) No matter.
TomS
Re: 1min System Setup
Authorized Builder
- 6 DR290
- Omni10.5
- AT, TAT
- Tuba 48
- 2 WH10
- Truck Tuba
http://www.boniton.co.il
http://www.bt-12.com Balanced Tilting Sounds Better...
- 6 DR290
- Omni10.5
- AT, TAT
- Tuba 48
- 2 WH10
- Truck Tuba
http://www.boniton.co.il
http://www.bt-12.com Balanced Tilting Sounds Better...
-
- Posts: 932
- Joined: Sun Jul 18, 2010 11:46 pm
- Location: Minneapolis, MN
Re: 1min System Setup
How well did the LabSubs keep up with the DR290s? Or were they just there for pattern control rather than sheer volume?
Re: 1min System Setup
The LABs are true beasts at the low end, as well as in size and weight...el_ingeniero wrote:How well did the LabSubs keep up with the DR290s? Or were they just there for pattern control rather than sheer volume?
In most of my gigs (light rock, folk and contemporary music) my two LABs keep up very nicely with 4 DR290s.
The ratio is of coarse material dependant but I would say for general purpose/rock/dance music one LAB is compatible to 1 to 1.5 DR290.
Authorized Builder
- 6 DR290
- Omni10.5
- AT, TAT
- Tuba 48
- 2 WH10
- Truck Tuba
http://www.boniton.co.il
http://www.bt-12.com Balanced Tilting Sounds Better...
- 6 DR290
- Omni10.5
- AT, TAT
- Tuba 48
- 2 WH10
- Truck Tuba
http://www.boniton.co.il
http://www.bt-12.com Balanced Tilting Sounds Better...