4 x T48 24" & 2 x T48 18" ... finally!

Post your build odyssey here.
Message
Author
DJ.LJ
Posts: 111
Joined: Thu Jan 27, 2011 9:15 pm
Location: Valparaiso, IN

Re: 4 x T48 24" & 2 x T48 18" ... finally!

#31 Post by DJ.LJ »

Build Session #11 - Time .. about 2.5 hours .. Total time so far 32.5 hours

This night I was able to finish up all the rest of the panel 5's and the braces.
= Built
4 -T39 X 24" .. 3012LF
2 x 2x6 SLA Pros
2 x 4x6 SLA Pros

= Equipment
DJM 900 SRT
CDJ 2000 Nexus x2
DDJ SZ
DBX DRIVERACK PX and PA2
DENON MC6000MK2
Crown XTI 2002 x3
Crown XTI 4002
Crown XTI 4000

= Building
4 x DR 250's
6 x T48s

DJ.LJ
Posts: 111
Joined: Thu Jan 27, 2011 9:15 pm
Location: Valparaiso, IN

Re: 4 x T48 24" & 2 x T48 18" ... finally!

#32 Post by DJ.LJ »

Build Session #12 - Time .. about 2 hours .. Total time so far 34.5 hours

Oh man.. I really goofed up this day!

#1 .. I realized I placed panel 5 incorrectly. I lined up the 45 edge up with the wrong line. I didn't notice panel 6 was supposed to go below not butted up against it!
IMG_1529.jpg
I just had to cut another 45 into panel 6 to get it to match up on the same horn path. Pain in the A$$. I ended up cutting it wrong the first time not accounting for all the angles.

I ended up just making a 1" tall jig with a 45 to get the correct measurements.
IMG_1531.jpg
Ended up getting 3 of them cut including the panel 6 extension.

QUESTION: Do I need to attach another 1/2" strip at the other end of panel 5 to account for the goof up? I wouldn't think it would make a difference but hey.. what would I know.

#2 .. I cut my panel 6 in the wrong direction for the 18" version. I cut it on the long side, not the shorter side. Measure twice. Cut once.

#3 .. I cut those panels too wide!! I cut them 18" instead of 17". :chainsaw: Measure twice. Cut once.

After trimming those down to the correct size I quit for the day. My head just wasn't in the game I guess. Better to stop and regroup another day.
= Built
4 -T39 X 24" .. 3012LF
2 x 2x6 SLA Pros
2 x 4x6 SLA Pros

= Equipment
DJM 900 SRT
CDJ 2000 Nexus x2
DDJ SZ
DBX DRIVERACK PX and PA2
DENON MC6000MK2
Crown XTI 2002 x3
Crown XTI 4002
Crown XTI 4000

= Building
4 x DR 250's
6 x T48s

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: 4 x T48 24" & 2 x T48 18" ... finally!

#33 Post by Grant Bunter »

DJ.LJ wrote: Sun May 17, 2020 3:43 pm Measure twice. Cut once.
Measure twice. Cut once.

After trimming those down to the correct size I quit for the day. My head just wasn't in the game I guess. Better to stop and regroup another day.
Don't feel bad, I almost did the same thing with my last pair of T39's.

Good move to pull up if it's not feeling good.
While it's hard work, it's also meant to be fun...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

CarterKraft
Posts: 255
Joined: Thu Oct 22, 2020 1:46 pm
Location: DFW

Re: 4 x T48 24" & 2 x T48 18" ... finally!

#34 Post by CarterKraft »

That sounds like some of my projects, can't win for loosing.
The older I get the more I realize it's better to just do something else than to forge ahead with the truck in reverse.
Weldon Carter

Post Reply