Can i glue multiple plywood together?

Post your build odyssey here.
Message
Author
Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Can i glue multiple plywood together?

#16 Post by Bruce Weldy »

djtrumptight wrote: Fri Jun 12, 2020 2:41 pm I just called Toledo plywood and the lady said she had 5 ply but wasn’t sure about 3 ply,she’s gonna check with their buyer and call me back.I will be using these with subs,three DR’s per side.
This is one instance where you might be able to find what you need at the big box stores, since they don't carry the good stuff.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Tom Smit
Posts: 7457
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Can i glue multiple plywood together?

#17 Post by Tom Smit »

Bruce Weldy wrote: Fri Jun 12, 2020 5:00 pm
djtrumptight wrote: Fri Jun 12, 2020 2:41 pm I just called Toledo plywood and the lady said she had 5 ply but wasn’t sure about 3 ply,she’s gonna check with their buyer and call me back.I will be using these with subs,three DR’s per side.
This is one instance where you might be able to find what you need at the big box stores, since they don't carry the good stuff.
That is where I found it a few years ago.
TomS

djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

Re: Can i glue multiple plywood together?

#18 Post by djtrumptight »

Bruce what did you use from the big box stores ? Im FINALLY finishing up my "honey do" list and ready to get this build finished.
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Can i glue multiple plywood together?

#19 Post by Bruce Weldy »

djtrumptight wrote: Wed Aug 19, 2020 1:42 pm Bruce what did you use from the big box stores ? Im FINALLY finishing up my "honey do" list and ready to get this build finished.
I haven't ever used it in a build, but I've seen some of it at HD over the years.....best I can remember.......of course, I don't remember even posting to this thread....it's been 2 months! I can't remember what I had for breakfast....

:mrgreen:

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Can i glue multiple plywood together?

#20 Post by Grant Bunter »

Bruce Weldy wrote: Wed Aug 19, 2020 2:26 pm I can't remember what I had for breakfast....
Errr are you sure you had breakfast?
Best go have it (again?) just to be sure...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Can i glue multiple plywood together?

#21 Post by Bruce Weldy »

Grant Bunter wrote: Wed Aug 19, 2020 4:19 pm
Bruce Weldy wrote: Wed Aug 19, 2020 2:26 pm I can't remember what I had for breakfast....
Errr are you sure you had breakfast?
Best go have it (again?) just to be sure...
Dammit Grant! You are probably right.....no wonder I'm getting so fat.....

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply