This is one instance where you might be able to find what you need at the big box stores, since they don't carry the good stuff.djtrumptight wrote: ↑Fri Jun 12, 2020 2:41 pm I just called Toledo plywood and the lady said she had 5 ply but wasn’t sure about 3 ply,she’s gonna check with their buyer and call me back.I will be using these with subs,three DR’s per side.
Can i glue multiple plywood together?
-
- Posts: 8322
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Can i glue multiple plywood together?
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: Can i glue multiple plywood together?
That is where I found it a few years ago.Bruce Weldy wrote: ↑Fri Jun 12, 2020 5:00 pmThis is one instance where you might be able to find what you need at the big box stores, since they don't carry the good stuff.djtrumptight wrote: ↑Fri Jun 12, 2020 2:41 pm I just called Toledo plywood and the lady said she had 5 ply but wasn’t sure about 3 ply,she’s gonna check with their buyer and call me back.I will be using these with subs,three DR’s per side.
TomS
-
- Posts: 823
- Joined: Tue Dec 15, 2009 6:08 pm
- Location: Detroit,Michigan
Re: Can i glue multiple plywood together?
Bruce what did you use from the big box stores ? Im FINALLY finishing up my "honey do" list and ready to get this build finished.
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
-
- Posts: 8322
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Can i glue multiple plywood together?
I haven't ever used it in a build, but I've seen some of it at HD over the years.....best I can remember.......of course, I don't remember even posting to this thread....it's been 2 months! I can't remember what I had for breakfast....djtrumptight wrote: ↑Wed Aug 19, 2020 1:42 pm Bruce what did you use from the big box stores ? Im FINALLY finishing up my "honey do" list and ready to get this build finished.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Can i glue multiple plywood together?
Errr are you sure you had breakfast?
Best go have it (again?) just to be sure...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
- Posts: 8322
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Can i glue multiple plywood together?
Dammit Grant! You are probably right.....no wonder I'm getting so fat.....Grant Bunter wrote: ↑Wed Aug 19, 2020 4:19 pmErrr are you sure you had breakfast?
Best go have it (again?) just to be sure...
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."