2x6 SLA Pro Build

Post your build odyssey here.
Message
Author
User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: 2x6 SLA Pro Build

#46 Post by Seth »

Bruce Weldy wrote: Sat Apr 11, 2020 7:24 am If you put on grills with a backer, no one can see the silver screws anyway....
That would be great, but unfortunately the silver hardware is for the top hats.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: 2x6 SLA Pro Build

#47 Post by Bruce Weldy »

SethRocksYou wrote: Sat Apr 11, 2020 8:45 pm
Bruce Weldy wrote: Sat Apr 11, 2020 7:24 am If you put on grills with a backer, no one can see the silver screws anyway....
That would be great, but unfortunately the silver hardware is for the top hats.
If you can see the tophat screws while the cab is in operation, you are setting 'em up wrong...
:mrgreen:

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply