Not sure if it was a build. What is this?

Post your build odyssey here.
Post Reply
Message
Author
Blondetigger
Posts: 10
Joined: Sun Dec 30, 2018 9:55 am
Location: Waterford, MI

Not sure if it was a build. What is this?

#1 Post by Blondetigger »

My dad was into all this stuff. I am still cleaning out stuff.
Is this a jack 1x12 ? I am searching and going by pictures.
Any info would be great.
Attachments
speaker thing.jpg
speker back.jpg

User avatar
Tom Smit
Posts: 7457
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Not sure if it was a build. What is this?

#2 Post by Tom Smit »

What is the inside height of the opening. Something tells me that it could be an O10.
TomS

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Not sure if it was a build. What is this?

#3 Post by Seth »

Sure miss your dad around here. Hope you and the family are getting along alright.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Not sure if it was a build. What is this?

#4 Post by Grant Bunter »

SethRocksYou wrote: Fri Dec 27, 2019 11:09 pm Sure miss your dad around here. Hope you and the family are getting along alright.
Great call on both counts...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: Not sure if it was a build. What is this?

#5 Post by Bill Fitzmaurice »

It's an old version J12 with no tweeters.

User avatar
AntonZ
Posts: 2664
Joined: Sun May 14, 2006 6:00 am
Location: NL

Re: Not sure if it was a build. What is this?

#6 Post by AntonZ »

Bill Fitzmaurice wrote: Sat Dec 28, 2019 8:59 am It's an old version J12 with no tweeters.
Indeed, what I was going to say. A Jack without tweeters is what your father used for bass guitar.

He crosses my mind every now and then. In a good way, mind you. I have your dad's wedge 8 (a vocal monitor).

Blondetigger
Posts: 10
Joined: Sun Dec 30, 2018 9:55 am
Location: Waterford, MI

Re: Not sure if it was a build. What is this?

#7 Post by Blondetigger »

Thank you everyone. We miss him around too.

How do i know if this works? I am assuming i plug a cord in the back and connect to bass. But like is there an on off switch? What size cord?

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Not sure if it was a build. What is this?

#8 Post by Bruce Weldy »

Blondetigger wrote: Sun Dec 29, 2019 10:50 am Thank you everyone. We miss him around too.

How do i know if this works? I am assuming i plug a cord in the back and connect to bass. But like is there an on off switch? What size cord?
You'll need to plug the guitar into an amp, then into the speaker.

You might try putting a post on FB and ask any of your friends out there to give you a hand - there's bound to be a musician in the bunch who could help you out and keep both you and the equipment safe.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply