My dad was into all this stuff. I am still cleaning out stuff.
Is this a jack 1x12 ? I am searching and going by pictures.
Any info would be great.
Not sure if it was a build. What is this?
-
- Posts: 10
- Joined: Sun Dec 30, 2018 9:55 am
- Location: Waterford, MI
Re: Not sure if it was a build. What is this?
What is the inside height of the opening. Something tells me that it could be an O10.
TomS
Re: Not sure if it was a build. What is this?
Sure miss your dad around here. Hope you and the family are getting along alright.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Not sure if it was a build. What is this?
Great call on both counts...SethRocksYou wrote: ↑Fri Dec 27, 2019 11:09 pm Sure miss your dad around here. Hope you and the family are getting along alright.
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
- Bill Fitzmaurice
- Site Admin
- Posts: 28647
- Joined: Tue May 02, 2006 5:59 pm
Re: Not sure if it was a build. What is this?
It's an old version J12 with no tweeters.
Re: Not sure if it was a build. What is this?
Indeed, what I was going to say. A Jack without tweeters is what your father used for bass guitar.
He crosses my mind every now and then. In a good way, mind you. I have your dad's wedge 8 (a vocal monitor).
-
- Posts: 10
- Joined: Sun Dec 30, 2018 9:55 am
- Location: Waterford, MI
Re: Not sure if it was a build. What is this?
Thank you everyone. We miss him around too.
How do i know if this works? I am assuming i plug a cord in the back and connect to bass. But like is there an on off switch? What size cord?
How do i know if this works? I am assuming i plug a cord in the back and connect to bass. But like is there an on off switch? What size cord?
-
- Posts: 8325
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Not sure if it was a build. What is this?
You'll need to plug the guitar into an amp, then into the speaker.Blondetigger wrote: ↑Sun Dec 29, 2019 10:50 am Thank you everyone. We miss him around too.
How do i know if this works? I am assuming i plug a cord in the back and connect to bass. But like is there an on off switch? What size cord?
You might try putting a post on FB and ask any of your friends out there to give you a hand - there's bound to be a musician in the bunch who could help you out and keep both you and the equipment safe.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."