6 Tuba 45s
6 Tuba 45s
I'm trying out google pictures to post stuff, since Photo bucket went in the.. well... bucket.
It's like a fresh piece of canvas, lets make some saw dust
It's like a fresh piece of canvas, lets make some saw dust
Last edited by J_Dunavin on Mon Jul 02, 2018 9:42 am, edited 1 time in total.
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
Re: 6 Tuba 45s
I'm seeing a no entry sign where a photo should be. Have you tried putting them on imgur?
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
- bitSmasher
- Posts: 629
- Joined: Fri May 30, 2008 2:55 am
- Location: Sydney, Aus.
Re: 6 Tuba 45s
I'm not sure Google will let you embed pics drectly from Photos, but one thing to double check is if you're using the shareable URL...
otherwise, Tinypic is a handy site for sharing (but not storing) online
otherwise, Tinypic is a handy site for sharing (but not storing) online
Re: 6 Tuba 45s
Oh it doesn't work?? I can see it on my main PC and my phones web browser.
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
Re: 6 Tuba 45s
Try to see it, but not when logged into the forum. I don't see the picture either.
TomS
Re: 6 Tuba 45s
Ok I'll try another share site.
On a positive note, eminance customer support was kind enough to send a PDF of the basket drawing for the 3012lf. Now I can draw the mounting holes spacing 1:1 in draftsight, print it and drill the mounting holes for the T nuts, without having the actual driver yet.
On a positive note, eminance customer support was kind enough to send a PDF of the basket drawing for the 3012lf. Now I can draw the mounting holes spacing 1:1 in draftsight, print it and drill the mounting holes for the T nuts, without having the actual driver yet.
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
-
- Posts: 676
- Joined: Tue Apr 30, 2013 5:56 pm
- Location: Colonial Beach VA
Re: 6 Tuba 45s
The driver spec sheet is perfectly accurate for the mounting hole and screws. Lay it out with a compass and a straight-edge... Probably more accurate than printing it out.
BFM rig:
6 OT12
4 T48
4 WH8
Other:
56 box Electrotec LabQ rig
Way too many cables
6 OT12
4 T48
4 WH8
Other:
56 box Electrotec LabQ rig
Way too many cables
Re: 6 Tuba 45s
I'll try and get more pictures up. Did the 1st one finally work?
Made progress yesterday and got all 90 pieces rough cut... Ugh that's a lot of plywood!
Made progress yesterday and got all 90 pieces rough cut... Ugh that's a lot of plywood!
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
Re: 6 Tuba 45s
This isn't the whole pile, but most of the pieces for the T45s
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
-
- Posts: 461
- Joined: Sun Feb 16, 2014 7:19 pm
- Location: Perth, Western Australia
Re: 6 Tuba 45s
Heh looks similar to the pile of panels I had when building my 6 T30s. Looking good so far
Built:
6 T30 (24", 3012LF)
2 OT12 (MA, 3012HO)
2 T24 (18", 3010LF)
Running:
DCX2496
XTi 2002
XTi 4002
TRAKTOR Z2
TECHNICS 1210 Mk5's
6 T30 (24", 3012LF)
2 OT12 (MA, 3012HO)
2 T24 (18", 3010LF)
Running:
DCX2496
XTi 2002
XTi 4002
TRAKTOR Z2
TECHNICS 1210 Mk5's
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: 6 Tuba 45s
I can't even stack wood that tidily.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
Re: 6 Tuba 45s
Ha! Normally I'm that organized either, but with trying to build DRs and a bunch of Tubas all under a time line, I'm really trying to stream line the process.
At this rate I'm going to have to have a painting party the week before the gig. Invite a bunch of guys over, get some pizza and drinks and roll some black paint.
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
Re: 6 Tuba 45s
In an effort to save time I drew the path in Draftsight and had office Max print a 1:1 copy. I cut out the important stuff and carefully lined it up on the ply wood. Then marked the plywood, took a rule and connected the dots.
I did double check the print 1st against the dimensions from the plans as well as checking some major points on the wood afterwards.
It REALLY speeds up the process and for me seems more consistent.
Not shown, but I also flipped it over and drew a line down the middle of the path, so I can easily shoot my Brad nailer on the backside, and know where the piece is.
I did double check the print 1st against the dimensions from the plans as well as checking some major points on the wood afterwards.
It REALLY speeds up the process and for me seems more consistent.
Not shown, but I also flipped it over and drew a line down the middle of the path, so I can easily shoot my Brad nailer on the backside, and know where the piece is.
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba