Making a pair of TAT....

Post your build odyssey here.
Message
Author
User avatar
Padde298
Posts: 115
Joined: Thu Jun 29, 2017 5:04 am
Location: Denmark

Re: Making a pair of TAT....

#61 Post by Padde298 »

More bass, more bass! :chainsaw: :chainsaw:

2 x TAT

User avatar
Tom Smit
Posts: 7454
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Making a pair of TAT....

#62 Post by Tom Smit »

Cool!

As an aside, you should rotate the top speaker cab so that the tweeters are together (both on the same side). Even better would be to have the bottom speaker standing up with the tweeter on top, and then place the other speaker on top of it with the tweeter on the bottom, such that the tweeters are together.
TomS

User avatar
Padde298
Posts: 115
Joined: Thu Jun 29, 2017 5:04 am
Location: Denmark

Re: Making a pair of TAT....

#63 Post by Padde298 »

Tom Smit wrote: Mon Aug 06, 2018 8:28 am Cool!

As an aside, you should rotate the top speaker cab so that the tweeters are together (both on the same side). Even better would be to have the bottom speaker standing up with the tweeter on top, and then place the other speaker on top of it with the tweeter on the bottom, such that the tweeters are together.
Thanks. I realize the physical position of the individual cabs are not ideal. But as weight has to be kept as low to the ground as possible, the tops are on the side... Will try to turn them so the horns are over each other... Thanks!
More bass, more bass! :chainsaw: :chainsaw:

2 x TAT

User avatar
Seth
Posts: 2721
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Making a pair of TAT....

#64 Post by Seth »

Congratulations on getting that sorted out. If you ever find yourself bored and in need of some entertainment, here's a fun suggestion... put them both in the cargo area of an SUV and give them a listen :D
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

User avatar
James Champer
Posts: 301
Joined: Thu Aug 23, 2012 7:00 pm
Location: BF Builder - Indianapolis
Contact:

Re: Making a pair of TAT....

#65 Post by James Champer »

Nice build.

Have you tried what Bill suggested if he were to use T39's? I would think that aiming the TAT's at the ground would not only have the two advantages he mentioned, but also add a "mystery" factor in that everyone will be looking around the bike wondering where the thump is coming from :D
Retired Authorized Loudspeaker Builder - Indianapolis, IN

User avatar
Padde298
Posts: 115
Joined: Thu Jun 29, 2017 5:04 am
Location: Denmark

Re: Making a pair of TAT....

#66 Post by Padde298 »

James Champer wrote: Mon Aug 06, 2018 7:05 pm Nice build.

Have you tried what Bill suggested if he were to use T39's? I would think that aiming the TAT's at the ground would not only have the two advantages he mentioned, but also add a "mystery" factor in that everyone will be looking around the bike wondering where the thump is coming from :D
Could be fun to see all the nerds going around the bike to see where the bass is coming from...! :lol: Only under the platform are the batteries, power capacitor and amp. It would take a total rethink of the positioning of these items if the horns should be down fireing... I would much rather have a front fireing cab, like the T60/45...
More bass, more bass! :chainsaw: :chainsaw:

2 x TAT

Post Reply